View Full Version : lidatek LE-10
does anyone know what the T1 T2 T3 plugs are in the back of this unit and explain it to me in laymen terms?
lostidentity
09-21-2009, 07:14 PM
you might have better luck in the laser jammer section considering these are laser jammers. PM a mod to move the thread.
isnt this the 'laser jammers' or do u mean 'blinder laser jammers'? or am i not understanding something
ELVATO
09-21-2009, 08:26 PM
Happyass might know. I think he has one.
happya$$
09-21-2009, 09:11 PM
T1 and T2 are for the front and T3 is for the rear.
T1 it is, thank u happya$$
untrueparadox
09-22-2009, 07:55 PM
dang. u still have the original LE10? does it jam anything new?
speed-dreams
09-22-2009, 08:22 PM
dang. u still have the original LE10? does it jam anything new?
It should, it's pure brute force...
rsatmans
09-22-2009, 08:27 PM
Doesn't the LE-10 trigger all the jam codes due to the brute force jamming method? Even if it did I would still buy one... I need the power :eek:
speed-dreams
09-22-2009, 09:20 PM
Doesn't the LE-10 trigger all the jam codes due to the brute force jamming method? Even if it did I would still buy one... I need the power :eek:
There's no constant jam, only a couple of seconds...
untrueparadox
09-22-2009, 10:17 PM
ya, i think its only 5. same as the other lidatek units. hate to get off topic, but is there any way to outfit a blinder m27 unit with a class 3 diode?
ELVATO
09-23-2009, 08:05 AM
Short answer, no (in a practical sense).
I'll let the EEs give you the long answer. :lol:
speed-dreams
09-23-2009, 10:10 AM
Short answer, no (in a practical sense).
I'll let the EEs give you the long answer. :lol:
you're right...
Blinder was designed to run LEDs not diodes...
It's like fitting a Blackberry screen onto an Iphone; even if they fit, it won't work because circuitry are designed differently.
On the other hand, you have better chances fitting a class 3 diode into the LI...
untrueparadox
09-23-2009, 12:31 PM
has anyone tried that? theres 904/905nm diodes online in 5mw+ and only cost $50 each. much cheaper than an hp head from LI and probably more powerful too, if it works. i tried searching here, doesnt seem like anyone tried it before.
speed-dreams
09-23-2009, 12:33 PM
has anyone tried that? theres 904/905nm diodes online in 5mw+ and only cost $50 each. much cheaper than an hp head from LI and probably more powerful too, if it works. i tried searching here, doesnt seem like anyone tried it before.
But you have to tweak the firmware ;)
there's no point in putting a stronger diode if you're outputing the same power from the circuitry...
untrueparadox
09-23-2009, 04:49 PM
ya probably. i was thinking something like drawing 12v from battery with resister and use the LI head as a sense so it knows what kind of pattern and ppm to flash. i dont have nearly the cash to spend on multiple LI heads, so i guess itll be someone else doing it.
i finally installed it today, now i just to see if it works
untrueparadox
10-04-2009, 01:29 PM
where u get it? i want one.
from what i understand and gathered from the net about this radar jammer(im a noob) is that its long been discontinued and is one of the very first jammers from like 10 years ago. im sure u've read that it uses brute force so i hope its not obsolete
djrams80
10-04-2009, 07:54 PM
from what i understand and gathered from the net about this radar jammer(im a noob) is that its long been discontinued and is one of the very first jammers from like 10 years ago. im sure u've read that it uses brute force so i hope its not obsoleteThe Lidatek LE-10 is a laser jammer, not a radar jammer. They haven't been produced in years and have reliability problems, so the odds are that it doesn't work.
my mistake, ty for correcting me but lets hope it does work tho, we shall see
untrueparadox
10-04-2009, 10:40 PM
from what i understand and gathered from the net about this radar jammer(im a noob) is that its long been discontinued and is one of the very first jammers from like 10 years ago. im sure u've read that it uses brute force so i hope its not obsolete
exactly why i want one lol. brute force + class 3 diode = crazy jamming power. but of course, cant buy it anywhere cause its long gone, would be kinda nice if i can find one for cheap tho.
Stealth Stalker
10-04-2009, 11:12 PM
I dunno if I would trust one as my sole jammer, but it'd sure be nice as an adjunct. But heck, unless you could get it über cheap, you might just as well get an LI HP.
charles charlie charles
10-05-2009, 01:25 AM
And do not forget that this older jammer will produce jam codes on most, if not all guns which have them.
Combine that with its unknown effectiveness against more modern lidar devices, you may end up with a double whammy...
I bought one cheap some 3-4 years ago and never fitted it for those 2 very important reasons.
i've been on RD.net for about a month now and thought i could decipher the abbreviations but some i still cant make out. is there a sticky thread somewhere that explains everything bc im lost sometimes
LI HP = ?
Stealth Stalker
10-05-2009, 02:07 AM
is there a sticky thread somewhere that explains everything bc im lost sometimes
If you have to ask, you cannot possibly have looked. ;)
lol my bad. i meant if there was a thread, someone please point me in the right direction. i have looked but am not successful
Stealth Stalker
10-05-2009, 02:19 AM
You described exactly where it was. It's a sticky, right above this thread. It's also in my signature.
http://www.daveoncode.com/wp-content/uploads/2009/02/doh.jpg
that is why ur a jedi and im a noob
hey rd.net, i took a 4 hour road trip yesterday and jackson, ms is the nearest town that has laser. i usually go about 85 but slowed down to 75 since the PSL was 70 to test out my le-10 bc i only have 1 jammer placed in the front. upon entering the outskirts of jackson on I-20E my le-10 went off so i slowed down a bit but couldnt spot where it was coming from, same thing happened when i was leaving on highway-49S . has anyone else been tagged on these 2 roads? could it have been a unmanned stationary unit that was tagging people perpendicular to the road?
snoopyc4
10-12-2009, 08:35 AM
There are no unmanned laser gun speed traps in the US. Didntheae alerts occur near or around an overpass?
djrams80
10-12-2009, 09:02 AM
If you didn't spot the LEO shooting a laser gun, chances are it was a false alert.
There are no unmanned laser gun speed traps in the US. Didntheae alerts occur near or around an overpass?
negative on the overpasses snoop
If you didn't spot the LEO shooting a laser gun, chances are it was a false alert.
roger that, i'll pay attention on my way back and will update as needed
snoopyc4
10-12-2009, 09:45 AM
There are no unmanned laser gun speed traps in the US. Didntheae alerts occur near or around an overpass?
negative on the overpasses snoop
If you didn't spot the LEO shooting a laser gun, chances are it was a false alert.
roger that, i'll pay attention on my way back and will update as needed
Look for this next time:
http://www.news-blogs.com/_images/auto/infiniti_fx45_2006.jpg
They are NOTORIOUS for causing laser jammers to false and are one of the most hated vehicles on this forum :mad:
AirMoore
10-12-2009, 09:49 AM
That another issue with the LE-10 it likely has much more rudimentary software in it: thus probably would false (even more than many current jammers do) to such things.
kpatz
10-12-2009, 12:34 PM
Smart jamming > brute force jamming.
The only benefit to more power is if you're protecting something like a Hummer or a semi.
Smart jammers minimize jam codes on guns and use different jamming patterns for different guns. The actual jamming beam doesn't need to be super powerful.
The only weakness of smart jammers is detection - they have to see the gun's pulses to jam them. This is why head placement is so critical, not so much for the jamming beam as for detecting the gun in the first place.
not a single hit on the way home but now my v1 is acting up. i'll search around to see whats wrong with it and post a vid if need be