Has anyone else noticed that the STi-R+ will keep displaying the frequency or band of the last signal it detected for a long time after the signal is gone?
My Redline consistently alerts before the STi-R+; using a stopwatch, I measured the time from when the Redline stopped alerting until the STi stopped alerting. The average of 5 times was 47 seconds (minimum of 45, maximum of 52). This was done at 5 different locations where there was only one signal present, and there were no other new signals for at least 1 mile.
If the STi picks up a new signal during this 45-50 second period, it will alert to the new one.
I'm not impressed by this "feature".