GMC Yukon front 4 banger

[nys464]

Well, finally got it installed and leveled. Now lets see how it works out! Since I wanted to keep it as discreet as possible, I opted not to cut into anything. Let me know what you all think........

[robcollins5]

It looks like the two in the upper row on the outsides are tilted laterally. No sure if that matters considering you can mount them vertically anyway?

rc

[nys464]

Yes that's true. But they are level and pointing perfectly forward. I'm guessing the fact that the grill and bumper are forward of the heads is more of an issue.

[Stealth Stalker]

I'd get that set-up tested before I put any faith in it. A dual LI on a chromed out Silverado, with the heads stuck in that same crevice, performed poorly. The two centre heads aren't really adding anything to the equation.

[crazyVOLVOrob]

Well, finally got it installed and leveled. Now lets see how it works out! Since I wanted to keep it as discreet as possible, I opted not to cut into anything. Let me know what you all think........

I really don't like your installation theoretically you just have your licence plate protected.

I will be on Long Island, Suffolk County area mid-may (after may 18th) and would gladly test your set-up against my Laser Atlanta.

Also what Blinder M45 do you have? J15?

[carter840]

I should be around there too mid may. Perhaps we cold arrange a little test. I would be worried that your setup does not protect your headlights.

[nys464]

Im not sure what version. But I'd definately love to run a test when you get out here. How long will you be around?

[hppck21]

your heads look a lil to far back... but once u test it... u will really know where u need better coverage...

[hockey005]

If It were me I would keep the too heads that are in the middle of the car and move the upper outer ones farther out maybe to the lights for headlight protection...i believe the rule with blinder is 18 inches apart MAX...

[nys464]

I'd love to. Unfortunately can't find a good spot other than to cut the grill. And even then, there's nothing solid to mount them to. I'll have to decide after the "test".