We have tested the new Blinder software and these are the codes you can expect.
BLINDER 7-Series / Vs. LaserPatrol
INT1.8 & US 2.6 are generating codes. All the way from 3000ft. down to about 120ft. both the INT-1.8 and US-2.6 are generating E12, afterwards inside 120ft and down to about 60ft. it generated E13, and at first for a short distance as 60ft. the E14 showed up sometimes but in testing never happened.
Laser Patrol fault codes as described in the original manual:
Unstable measurement / Irregular target contour or equipment wobbled”
Distance measurement range / Target to close
Measurement distorted. – Target has laser jamming transmitter, OR LASER DISTANCE SENSOR
BLINDER 7-Series / Vs. TraffiPatrol XR
INT1.8 & US 2.6 against the TraffiPatrol XR are generating code E10 all the way from 2000 - 3000ft. down to about 200-250ft. where E10 change to E48 and normally not before but around 90ft. it can generate code E14
TraffiPatrol XR fault codes as described in the original manual:
NO target registered / Target too far away or reflects too weakly.
Code E48 Not described in the manual
Error messages not described in this manual indicate internal problems. Please contact ROBOT Visual Systems GmbH. Customer service
Also I should have all three guns( LP, XR and TS-II/EU ) in the states soon and will getting together with the Georgia Testers to do some shooting.