Results 1 to 9 of 9

Thread: Error code?

  1. #1

    Default Error code?

    I recently puchased and installed a Blinder M20 on my '06 Mustang, and it seems to be doing something odd. After it turns on it gives me an alert for the self test, then the LED switches to green... about 15 seconds later I get another alert, then it switches back to green. It does this every time. Is this some sort of error code?

    Thanks.

  2. #2
    Radar Fanatic
    Join Date
    Feb 2005
    Location
    Earth
    Posts
    2,357

    Default

    I'm pretty sure that the Blinder is set up to check connectivity between the control unit and the jamming heads. If there is a bad connection or faulty wiring it should do something. (I'm not sure exactly what.) I would double-check your connections, including power and ground.

  3. #3
    Old Timer
    Join Date
    Jun 2005
    Location
    New Hampshire
    Posts
    6,806

    Default

    The latest Blinder revision goes into a test mode for 30 seconds after being powered up. After the test mode cancels, it beeps again.

    During the test mode, it reduces its filtering so you can test it using a remote or laser tester. After 30 seconds, the filtering is activated so it doesn't false.

    See more info in this thread: http://www.radardetector.net/new-m-2...onds-6474t.php
    If I'm passing you on the right, YOU are in the wrong lane!

    If speed kills, how come I'm still alive?

    Active Countermeasures: V1 3.858, Escort Redline, Beltronics STi-R+, LI Dual 7.1x CPU/8.7 Heads (front)
    Other/Backup Countermeasures: V1 3.813 (loaned to friend), Beltronics Pro RX65 M4 6.3
    Vehicle: 2002 Audi A4 1.8T Quattro
    LEO Toys: Kustom Pro Laser II & III
    Encounters/Saves August 2011: Radar 3/1, Laser 0/0


  4. #4

    Default

    Sorry... I didn't see that thread.

    Thanks for the info.

  5. #5

    Default

    I obtained a new M-20 direct from Leon after contacting him regarding the "Stealth Bug" on my old units. I thought I would have latest revision but they dont seem to have this really useful feature...

    Info from the box..
    REV.5E 7.25.04J
    S/N AB 30384
    0524

    Any thoughts ?

  6. #6
    Speed Demon
    Join Date
    Jun 2005
    Location
    Computer interfacing!!
    Posts
    538

    Default

    Mine does not have this test mode,and will not audio alert to JTW's tester.
    REV.5E 7.25.04J3 S/N: AB 31228

  7. #7
    Manufacturer
    Join Date
    Dec 2004
    Location
    Palm Beach Gardens FL.
    Posts
    393

    Default

    This new feature has been added to see your response.
    The old Blinder will not respond the that tester because of the filter, the new ones will for the first 30 seconds.
    Demark is always looking to make your laser defense better and will continue for years to come.
    I have been away from the board (busy) and moving our offices.
    It's good to be back.

  8. #8
    Speed Demon
    Join Date
    Jun 2005
    Location
    Computer interfacing!!
    Posts
    538

    Default

    Good to have you back! Where did you move ?

  9. #9
    Manufacturer
    Join Date
    Dec 2004
    Location
    Palm Beach Gardens FL.
    Posts
    393

    Default

    Only to a bigger shop.
    Still Palm Beach County FL.

 

 

Similar Threads

  1. QI 45 error code
    By indyracer10 in forum Escort
    Replies: 2
    Last Post: 08-02-2012, 07:36 PM
  2. 8500 error code
    By merrok45 in forum Radar Detectors - General
    Replies: 5
    Last Post: 04-20-2011, 06:23 PM
  3. Replies: 4
    Last Post: 11-21-2007, 10:15 PM
  4. Error code definitions on different Laser Guns
    By cracker in forum Laser Jammers - General
    Replies: 5
    Last Post: 10-22-2006, 10:36 AM
  5. RX65 Error code
    By ephonda in forum Beltronics
    Replies: 20
    Last Post: 10-05-2005, 08:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •