Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Blinder software update 12-20-2013

    Blinder.dk claims a new update

    DATE CPU Rev. REGIONS VOICE VERSIONS AVAILABLE
    2013-12-20 1.01 9 4 FW. 13.45.01
    Release Notes:


    Firmware 13.45.01


    Optimization of jamming algorithms for all laser guns contained in HP-905ís FW
    Regionalization of the software to remove unused laser guns in the selected region.

    BLINDER HP-905 Software Upgrade Downloads

    I can't seem to get it to flash though.. there software comes with no instruction, you'd think it'd be straight forward, I tried 'update cpu' said it was successful, but when I unplug and plug back in it shows old software version OR 0.0 as firmware version. I tried testing different voices, tried putting hungarian on and flashing and then turning the blinder on, still was English.. doesn't seem like it's flashing anything. There is an 'UPLOAD' button, but this button just gives a failed to find FW file... very odd.

  2. #2
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: Blinder software update 12-20-2013

    meh. Figured it out my VPN wasn't letting the software connect to blinders servers when pressing UPLOAD.. all good now

  3. #3
    Advanced Member
    Join Date
    Oct 2008
    Location
    Canada
    Posts
    234

    Default Re: Blinder software update 12-20-2013

    how about an update for M27 ??
    Bel STiR
    escort 9500ci

  4. #4
    Newcomer
    Join Date
    Jul 2012
    Posts
    15

    Default Re: Blinder software update 12-20-2013

    Going to try to update to FW. 14.02.01 version today. Going to switch to world, for region, instead of USA. Startup sound on, constant jamming, sun interference off..BlinderUpdate 2014.01.07. I think this is the latest. HP 905
    Last edited by chap; 01-11-2014 at 07:43 AM.

  5. #5
    Newcomer
    Join Date
    Jul 2012
    Posts
    15

    Default Re: Blinder software update 12-20-2013

    Why does it show on the downloader that I have FW 12.50.01 when I used FW 14.02.01 updater and updated my cpu with FW 14.02.01?

  6. #6
    Newcomer
    Join Date
    Jul 2012
    Posts
    15

    Default Re: Blinder software update 12-20-2013

    VPn???
    Quote Originally Posted by Lucky225 View Post
    meh. Figured it out my VPN wasn't letting the software connect to blinders servers when pressing UPLOAD.. all good now

  7. #7
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: Blinder software update 12-20-2013

    Quote Originally Posted by chap View Post
    VPn???
    Quote Originally Posted by Lucky225 View Post
    meh. Figured it out my VPN wasn't letting the software connect to blinders servers when pressing UPLOAD.. all good now
    Virtual Private Network, seems this blinder software is a little buggy, you have to allow it to disable windows firewall and stuff to get it to work.

  8. #8
    Newcomer
    Join Date
    Jul 2012
    Posts
    15

    Default Re: Blinder software update 12-20-2013

    Still having trouble with uploading the FW14.02.01. Still getting error message when trying to upload...Followed directions, and disabled firewall to see if that would work, still getting error message....Still showing FW12.50.1..Could anyone give me ideas on what to try?? Took the last one fine....

  9. #9
    Street Lawyer
    Join Date
    Jul 2006
    Location
    719, Colorado
    Posts
    7,108

    Default Re: Blinder software update 12-20-2013

    Try uninstalling the blinder update tools and all traces of it and then re-install it. How are you doing the update? (i.e. laptop on wifi out to your car or are you bringing the cpu inside to a desktop and hooking it up there?) I suspect there might be an issue with wifi and this installer as I had issues with it when attempting outside in my car.

  10. #10
    Newcomer
    Join Date
    Jul 2012
    Posts
    15

    Default Re: Blinder software update 12-20-2013

    I have been taking my laptop to the car, like I have before...my internet signal is pretty strong when trying to upload.. I will try uninstalling all blinder update tools and reinstalling.. when trying to upload the update, I usually just unplug power supply and hook up the CPU to USB port and start program in auto.. also I will try a different USB port on my laptop.., its just a PIA to get the CPU from car, cause I used 3M double stick tape when installing...

    Quote Originally Posted by Lucky225 View Post
    Try uninstalling the blinder update tools and all traces of it and then re-install it. How are you doing the update? (i.e. laptop on wifi out to your car or are you bringing the cpu inside to a desktop and hooking it up there?) I suspect there might be an issue with wifi and this installer as I had issues with it when attempting outside in my car.

 

 

Similar Threads

  1. Replies: 1
    Last Post: 09-21-2013, 10:15 PM
  2. Blinder HP905 NEW SOFTWARE UPDATE ...
    By ECM in forum Blinder Laser Jammers
    Replies: 4
    Last Post: 12-22-2012, 06:28 PM
  3. Software update
    By 3nder in forum Blinder Laser Jammers
    Replies: 11
    Last Post: 08-19-2009, 05:36 PM
  4. Update Software
    By sailor_david in forum Other Countermeasures
    Replies: 2
    Last Post: 01-11-2009, 06:11 PM
  5. STi software update??? maybe Ka 33.8 fix?
    By licamell in forum Beltronics
    Replies: 8
    Last Post: 07-20-2007, 08:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •