If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Well I finally had a day off and got the 9500ci installed. I did not mount the zr4 shifter heads but I may next week. Now all i have to do is get the car cleaned back up and take some pictures of the install to post for everyone's review.
I'll probably go out this evening looking for for some radar or laser speedtraps set up and see if I can get some video of the new system installed.
__________________
Valentine One 3.858 (F150 & Cadillac SRX, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
Blinder M27 (On F-150)
STi-R (On F-150)
Veil G4 on F-150
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, & Laser Atlanta "R" (looking for an Ultralyte LRB)
2008 Corvette Z-51 Coupe
Escort 9500 ix (Returned to Escort)
Last edited by category4; 11-07-2008 at 05:39 PM..
Well I finally had a day off and got the 9500ci installed. I did not mount the zr4 shifter heads but I may next week. Now all i have to do is get the car cleaned back up and take some pictures of the install to post for everyone's review.
I'll probably go out this evening looking for for some radar or laser speedtraps set up and see if I can get some video of the new system installed.
damit category, you can't do that! lol next time don't get us hyped up and not put pictures in it! SOB, haha jk
damit category, you can't do that! lol next time don't get us hyped up and not put pictures in it! SOB, haha jk
OK, took a few quick pictures and added the links for your enjoyment.
__________________
Valentine One 3.858 (F150 & Cadillac SRX, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
Blinder M27 (On F-150)
STi-R (On F-150)
Veil G4 on F-150
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, & Laser Atlanta "R" (looking for an Ultralyte LRB)
What kind of mount do you have the display attached to?
I spent about 5 hours installing it and mounted the display module to a Proclip mount that I had been using for my GPS system. I took the GPS out a few months ago and when I went to install things today I thought that would be a good location.
__________________
Valentine One 3.858 (F150 & Cadillac SRX, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
Blinder M27 (On F-150)
STi-R (On F-150)
Veil G4 on F-150
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, & Laser Atlanta "R" (looking for an Ultralyte LRB)
I spent about 5 hours installing it and mounted the display module to a Proclip mount that I had been using for my GPS system. I took the GPS out a few months ago and when I went to install things today I thought that would be a good location.
Wow, 5 hours. When I start to install things, it always takes me longer than I planned. Where is the speaker?
well i just got mine today
so i may be doing weekend install
wont be so bad for me i just have to remove my STiR
not digging that GPS antenna what where they thinking
Wow, 5 hours. When I start to install things, it always takes me longer than I planned. Where is the speaker?
Mounted the speaker on the waterfall between the seats. I'll get some better pics tomorrow and show where everything mounted. I actually mounted 2 speakers there, one for the 9500ci and one for the LI.
It only took 5 hours because I knew exactly how to route everything since I recently installed the LI. I slao did not install the shifters so that saved me some time also.
__________________
Valentine One 3.858 (F150 & Cadillac SRX, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
Blinder M27 (On F-150)
STi-R (On F-150)
Veil G4 on F-150
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, & Laser Atlanta "R" (looking for an Ultralyte LRB)
well i just got mine today
so i may be doing weekend install
wont be so bad for me i just have to remove my STiR
not digging that GPS antenna what where they thinking
You can put that GPS antenna almost anywhere, corner of the dash, rear deck. some have put in the 3rd brake housing, etc.
You can put that GPS antenna almost anywhere, corner of the dash, rear deck. some have put in the 3rd brake housing, etc.
I put mine in the corner of the cargo area right behind the passenger seat. But in a Vette you can put it anywhere as the is nothing metal to block the signal.
__________________
Valentine One 3.858 (F150 & Cadillac SRX, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
Blinder M27 (On F-150)
STi-R (On F-150)
Veil G4 on F-150
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, & Laser Atlanta "R" (looking for an Ultralyte LRB)
Radar Roy's Detector and Jammer Buyer's Guide!
For pros or novices, this FREE 22 page consumer report is a must read for anyone considering any speed counter measure device. Radar Detector Buyer's Guide
Visit RadarBusters for all your Speed Countermeasure Equipment RadarBusters.com
Got the 9500ci Installed! 
