Results 1 to 5 of 5
  1. #1
    Good Citizen
    Join Date
    Apr 2009
    Posts
    113

    Default Ports for Front Laser On LI

    Hello,

    I am testing my LI since one of my heads are defective, and I was wondering what the original configuration (which ports 1-4) were the ports for the front? I have the LI screwed into the car, so I can't look into the underside of it. I just checked the manual it doesn't seem to tell you which ports are for the front.

    Thanks!

  2. #2

    Default Re: Ports for Front Laser On LI

    The Ports assignments for the front and rear may be in any combination of the following pairs: Ports 2 and 3 for DUAL LIs and Ports 1/4 and 2/3 for QUAD LIs. In other words, you may use Ports 1/4 or Ports 2/3 for either the front or the rear if you have a QUAD and ONLY 2 and 3 if you have a DUAL LI.

    Cliff - LI-USA/LI-UK/LI-Canada
    Last edited by Laser-InterceptorUSA; 07-20-2009 at 10:20 AM.

  3. #3
    Good Citizen
    Join Date
    Apr 2009
    Posts
    113

    Default Re: Ports for Front Laser On LI

    weird. I just tried connecting to ports 1 and 4 when I turned it on it said "connections 2, 3 are loose or lost" (something along that line). I had to plug it into 2 and 3 in order for it to say "welcome"

  4. #4

    Default Re: Ports for Front Laser On LI

    Not weird at all.

    DUAL LIs are set up for Ports 2 and 3. QUAD LIs are set up for port 1, 2, 3 and 4.

    Cliff - LI-USA/LI-UK/LI-Canada

  5. #5
    Good Citizen
    Join Date
    Apr 2009
    Posts
    113

    Default Re: Ports for Front Laser On LI

    oh yea sorry. I didn't read the entire post. X_X

 

 

Similar Threads

  1. V1 Ports - Wiring Pin Out Schematic
    By 904nm in forum Valentine One
    Replies: 9
    Last Post: 10-10-2015, 09:35 PM
  2. How much of the front does the laser actually hit?
    By warnerwh in forum Laser Jammers - General
    Replies: 0
    Last Post: 06-12-2012, 03:02 PM
  3. mesh in front of laser sight?
    By ziddey in forum Radar Detectors - General
    Replies: 2
    Last Post: 10-30-2007, 04:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •