Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    With the SIA Set to "0" (No SIA Alerts), the 255 setting is not a factor. Yes, it is the time, in seconds, between subsequent SIA Alerts.

    The setting will NOT affect the ability of the LI to detect and JAM but rather is simply designed to give warning to the user of possible degradation of the LI to respond to LIDAR if blinded in these scenario. We turn SIA OFF as this is the one biggest complaints by users who have asked that it be turned OFF.

    Cliff

  2. #12
    Good Citizen
    Join Date
    Feb 2009
    Posts
    197

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    Quote Originally Posted by Laser-InterceptorUSA View Post
    If you ordered you Gen. 8 with the PA/JAM Switch, it was already configured for it. Just install and play!

    Cliff
    Yes, I orderdered it from Hayneedle/RadarBusters with the optional switch. Would they have made a software adjustment or does the CPU automaticallty sense the switch and adjust itself?

    If I choose to install it without the switch or move it to another vehicle without the switch do I need to reprogram?

    In otherwords, do users have to manually adjust the software each time we choose to install or not install the optional switch? If reprogramming is required, how can we be sure what it was programmed for upon shipping since many users may not have a laptop with a serial port.

    Also, do you know if the serial to USB cable listed below works on the LI (or any other similar converter cable)/
    http://www.newegg.com/Product/Produc...82E16812107108

    If not, what serial cable can we use and where can we get one that is compatable.


    Thanks
    Last edited by poolmon; 05-14-2010 at 07:22 AM.

  3. #13

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    Yes, unless your LI was preconfigured for the PA/JAM Switch at the time you placed your order for your LI with the PA/JAM Switch option, you will need to program the CPU for a PA/JAM Switch if you add it at a later date.

    Any cable will work as long as it is compatible with your Version of Windows.

    Cliff
    Last edited by Laser-InterceptorUSA; 05-14-2010 at 07:34 AM.

  4. #14
    Speed Demon
    Join Date
    Sep 2009
    Location
    North Texas
    Posts
    714

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    Quote Originally Posted by g-zona View Post
    Click on "Default" and change from sensors 1 and 2 to 2 and 3. Also download v2.55. That's default for the dual.
    I don't see a version 2.55, but 2.54.

  5. #15

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    It'll be up in a day or so.

    Cliff
    Last edited by Laser-InterceptorUSA; 05-15-2010 at 06:49 PM.

  6. #16
    Speed Demon
    Join Date
    Jan 2006
    Location
    Croatia
    Posts
    586

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    Quote Originally Posted by dslrip32 View Post
    Quote Originally Posted by g-zona View Post
    Click on "Default" and change from sensors 1 and 2 to 2 and 3. Also download v2.55. That's default for the dual.
    I don't see a version 2.55, but 2.54.
    LI User's CPU Setting Software - Version 8.xx ONLY (v2.55)

  7. #17
    Newcomer
    Join Date
    May 2009
    Location
    Plano, Tx
    Posts
    50

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    Some of us can't use this cool new software and upgradable firmware option because teh 7.xx to 8.xx upgrade isn't available for us yet...hint hint.

    Jay

  8. #18
    Newcomer
    Join Date
    Oct 2007
    Location
    Lenexa, Kansas
    Posts
    49

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    Quote Originally Posted by Laser-InterceptorUSA View Post

    Check Check Sensor 1 for a Single, 2 and 3 for a DUAL, 1, 2, and 3 for a TRIPLE and 1, 2, 3, 4 for a QUAD.

    Please feel free to email or call me should you have any additional questions at all.

    Cliff
    I'm a little confused. If you have a "Dual sensor" setup. Do you plug it into #1 and #2 in the CPU or #2 and #3?

  9. #19
    Speed Demon
    Join Date
    Apr 2012
    Location
    Amerika
    Posts
    691

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    Quote Originally Posted by moturadar View Post
    Quote Originally Posted by Laser-InterceptorUSA View Post

    Check Check Sensor 1 for a Single, 2 and 3 for a DUAL, 1, 2, and 3 for a TRIPLE and 1, 2, 3, 4 for a QUAD.

    Please feel free to email or call me should you have any additional questions at all.

    Cliff
    I'm a little confused. If you have a "Dual sensor" setup. Do you plug it into #1 and #2 in the CPU or #2 and #3?
    Use Ports 1 & 2 for a "Dual" set-up.

  10. #20
    Speed Demon
    Join Date
    Apr 2012
    Location
    Amerika
    Posts
    691

    Default Re: LI Communicator Software :: Optimal Settings, etc.

    Quote Originally Posted by moturadar View Post
    Quote Originally Posted by Laser-InterceptorUSA View Post

    Check Check Sensor 1 for a Single, 2 and 3 for a DUAL, 1, 2, and 3 for a TRIPLE and 1, 2, 3, 4 for a QUAD.

    Please feel free to email or call me should you have any additional questions at all.

    Cliff
    I'm a little confused. If you have a "Dual sensor" setup. Do you plug it into #1 and #2 in the CPU or #2 and #3?
    Use Ports 1 & 2 for a "Dual" set-up.

 

 

Similar Threads

  1. Can Not Connect CPU With Communicator
    By EasY E in forum Laser Interceptor
    Replies: 9
    Last Post: 10-16-2011, 07:52 PM
  2. Optimal Settings
    By Jay78412 in forum Valentine One
    Replies: 3
    Last Post: 08-31-2011, 10:53 AM
  3. Need a little help with the LI communicator
    By STI_Boy in forum Laser Interceptor
    Replies: 4
    Last Post: 06-25-2011, 10:34 PM
  4. LI Communicator
    By Qui-Gon in forum Laser Interceptor
    Replies: 2
    Last Post: 09-26-2010, 07:42 PM
  5. GX65 and Q/T - optimal settings
    By The Chariot in forum Beltronics
    Replies: 26
    Last Post: 01-10-2010, 08:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •