Setup For Poliscan
Hi All I thought I would post up this question in the interest of public information.
I currently have two LIs up front and two Lis at the back.
The front LIs are setup as per the book. Straight level and work great with dozens of saves against Handhelds Lasers and plenty of warning about Poliscan cameras.
Rear setup is either side of number plate at around 22 degrees and after four passes through rear setup Poliscans at over the speed limit they seem to work well.
I know want to set another 2 at the front with around the same angle as the rear.
So the front setup will be two straight for Handheld Laser and the other two for Poliscan cameras.
FYI I run two separate CPUs one for the front and one for the back.
Now the questions is that any one of these front LIs will detect the Laser hit and set off all the LIs into firing mode. Since I will have them setup at two straight and two at an angle will they interfere with each other and be less effective against the handheld lasers.