Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Experienced
    Join Date
    May 2005
    Location
    Garda Lake -Italy
    Posts
    294

    Default Anyone have or any opinion about Bel LaserPro 905 ?

    i bought one week ago a bel rx65...
    and i'm just to have some information about the compatible laser jammer LaserPro 905...

    any opinion about that?

    tnx a lot...

  2. #2
    Power User
    Join Date
    Feb 2005
    Location
    In Car RamRod
    Posts
    4,001

    Default

    dont know much but;

    Features

    Unique "shifting" system virtually eliminates laser speed measurement
    Alerts to Laser encounters from front and rear
    2 discreet exterior-mounted front Laser modules
    1 rear-mounted Laser module
    Direct connection with BELís Vector and Pro series detectors
    Fully integrated detection / defense system
    Loss of connection alert when Laser modules are not properly connected
    Set includes 1 rear exterior-mounted laser transceiver, 2 discreet exterior-mounted front laser transceivers, and a central hub for easy connection of all components

  3. #3
    Experienced
    Join Date
    May 2005
    Location
    Garda Lake -Italy
    Posts
    294

    Default

    tnx a lot for the feature...

    p.s.
    i'm from italy...

  4. #4
    Banned
    Join Date
    Mar 2005
    Location
    Seattle
    Posts
    2,854

    Default

    All I have to say is put the rear transponder on the front of your car as well. The rear transponder isn't powerful enough to jam laser from the back. Might as well put it in the front for some good use.

    Chris

  5. #5
    Experienced
    Join Date
    May 2005
    Location
    Garda Lake -Italy
    Posts
    294

    Default

    Quote Originally Posted by JammerTests Webmaster
    All I have to say is put the rear transponder on the front of your car as well. The rear transponder isn't powerful enough to jam laser from the back. Might as well put it in the front for some good use.

    Chris
    :P :P a great opinion...

    do you know how are connected the trasponder? with cambles or others??

    tnx a lot

  6. #6
    Experienced
    Join Date
    May 2005
    Location
    Garda Lake -Italy
    Posts
    294

    Default

    do anyone know if it's difficult to mount it om my car ( an audi a3 '01)

    tnx a lot!!

    stefano

  7. #7
    Lead Foot
    Join Date
    Jan 2005
    Posts
    403

    Default

    One thing to remember is that this system requires the RX65, RX55, Vector 995, or Vector 965 in order to work. It is not a stand-alone unit. If the detector goes bad then the system is useless until you get another compatible detector from Bel. There are also no replaceable lenses so if they get scratched up or broken you are SOL without buying a complete replacement head. People have also reported that their units leaked water after the warranty was gone causing them to go bad. Also if you do not buy from an authorized retailer or get the unit installed professionally then you have no warranty on it either. If something goes bad then you still may have to pay for an installer to remove and replace part of the unit. For these reasons and after comparing it to some other laser jammers, I decided not to get it even though I have an RX65.

    As far an installation, post a picture of your car. You also need to plan out where you will run the wires to get through your car's firewall and get power. You also need to find a suitable location for the central hub and figure out how you will connect to your detector.

  8. #8
    Power User
    Join Date
    Feb 2005
    Location
    In Car RamRod
    Posts
    4,001

    Default

    all easy, just follow the other cables and use a tracer...

    Why do you need a detector as well?? Is this the case for the Bllinder and mimic?? How does it work with the jammer??

  9. #9
    Advanced Member
    Join Date
    Feb 2005
    Location
    Southern MA
    Posts
    10,127

    Default

    Also the hooking thew BEL LP905 to the BEL unit makes the BEL unit activate the jammers making it act like another reciever

    Spoiler: show

    Radar Detectors-V1 & BEL v995
    Laser Jammer-Laser Interceptor Quad
    GPS Camera Locator-Cheetah C100
    GPS Nav-Garmin nuvi w/Trapster
    CB Radio-Galaxy DX-949 w/Wilson 500
    Scanner-RS Pro-96

  10. #10
    Power User
    Join Date
    Feb 2005
    Location
    In Car RamRod
    Posts
    4,001

    Default

    oh ok....I see so the blinder and mimic work alone..

 

 

Similar Threads

  1. Laserpro 904 & RX 965 Pro
    By storm2313 in forum Beltronics
    Replies: 6
    Last Post: 11-10-2008, 08:28 PM
  2. if u had a working laserpro 904..
    By radardan24 in forum Laser Jammers - General
    Replies: 0
    Last Post: 08-13-2006, 03:01 PM
  3. laserpro 905
    By stevrod75 in forum Radar Detectors - General
    Replies: 6
    Last Post: 05-19-2006, 10:09 AM
  4. LaserPro 905?
    By SportsFan in forum Laser Jammers - General
    Replies: 9
    Last Post: 12-15-2005, 09:20 PM
  5. LaserPro 905
    By snapshotmd in forum Radar Detectors - General
    Replies: 1
    Last Post: 06-20-2005, 10:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •