Results 1 to 10 of 10
  1. #1
    Newcomer
    Join Date
    Mar 2011
    Posts
    2

    Default jammer head sizes

    Hi all,

    I am looking at getting a blinder or LI and was trying to figure out what the size is of the heads (for grill/rear install purposes). I found some of the information in the LI manual, however, not the height for instance. Same for the blinder M27/M47.

    I would appreciate it if someone can provide these (LxWxH) for both?

    Thanks,

  2. #2
    Experienced
    Join Date
    Jan 2011
    Posts
    281

    Default Re: jammer head sizes

    Found this on Blinder's site here: http://www.blinder.net/blinder-m47.htm

    Blinder M27 & M47 X-Treme Laser Jammer Specifications:
    Physical dimensions: 104 x 51 x 18 mm / 4.251969" x 2.007874" x 0.7086614"

    Found this on LI USA here: http://www.laser-interceptorusa.com/673.html
    3-1/8"L x 13/16"W x 9/16"H

  3. #3
    Professional
    Join Date
    Nov 2010
    Posts
    863

    Default Re: jammer head sizes

    I'd go with the LI b/c of better jamming capabilities and the heads are alot smaller. Plus Cliff, the USA distributor provides the best customer service I've seen ANYWHERE. And trust me, I'm VERY picky about customer service.

  4. #4
    Radar Fanatic
    Join Date
    May 2010
    Location
    Cyberspace
    Posts
    2,569

    Default Re: jammer head sizes

    I was pleasantly surprised how small the LI heads are and they perform well too.

  5. #5
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,717

    Default Re: jammer head sizes

    The LI heads are less than 1/2 the size of the blinder heads.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  6. #6
    Banned
    Join Date
    Jun 2007
    Posts
    9,497

    Default Re: jammer head sizes

    Cliff is amazing, and the LI's are pretty good too.

  7. #7
    Banned
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    94

    Default Re: jammer head sizes

    Go for LI if you are worried about the size of the heads, Blinder heads are hard to hide because of their size.
    I have noticed Laser masks new diode jammer which is awesomely tiny heads, but no one has anything to say about this model. So I don't know if it is worth the risk.

  8. #8
    Experienced
    Join Date
    Jul 2007
    Location
    トロント
    Posts
    279

    Default Re: jammer head sizes

    I picked up the ALG9 RX due to the head size, measuring in at 1.7 x 0.8 x 2.0 in, in terms of size I beleive this are the smallest heads you can get on a "good" jammer. Although my previous vehicle was running the LI unit, and I too can give nothing but praise to the LI system and the service from Cliff.

  9. #9
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,717

    Default Re: jammer head sizes

    Quote Originally Posted by Rowan View Post
    Go for LI if you are worried about the size of the heads, Blinder heads are hard to hide because of their size.
    I have noticed Laser masks new diode jammer which is awesomely tiny heads, but no one has anything to say about this model. So I don't know if it is worth the risk.
    I'd love to find a set to test.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  10. #10
    Newcomer
    Join Date
    Mar 2011
    Posts
    2

    Default Re: jammer head sizes

    Thanks all for the help. The smaller size definitely will help fitting it in the front grill.

    I too would be interested to see any details on those new Laser Masks though. I haven't been able to find anything concrete except that video.

 

 

Similar Threads

  1. LI Switch Sizes
    By beeslappa in forum Laser Interceptor
    Replies: 10
    Last Post: 08-08-2010, 10:49 PM
  2. Replies: 2
    Last Post: 09-11-2007, 03:37 PM
  3. Jammer head to big
    By mrcllusb in forum Laser Jammers - General
    Replies: 17
    Last Post: 04-18-2007, 07:21 PM
  4. 3m to hold jammer bracket and not jammer head?
    By mrcllusb in forum Laser Jammers - General
    Replies: 3
    Last Post: 04-13-2007, 09:31 PM
  5. Update file sizes?
    By AirMoore in forum Other Countermeasures
    Replies: 11
    Last Post: 03-27-2007, 04:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •