Results 1 to 8 of 8
  1. #1
    Radar Fanatic
    Join Date
    Mar 2005
    Location
    Staffordshire, Uk
    Posts
    1,999

    Default laser error codes and easy to remove jammers!

    i'm concidering getting a laser jammer sice the camera partnerships have started to target the motorways!!

    i know what some laser guns have jammer indicators and some laser jammers dont set the indicator off!

    but when the laser jammer jams the gun gives off an error code

    E01 E02 E03 E04!!

    I know that E02 can be caused by a jammer but it can also be caused by interuption to the beam!

    whats this E04!

    if i get a jammer i want it to give off an error code which will make the operator think its just out of range etc!

    if ive got the jammer on and i see the van before they laser me i will slow down if i'm over the limit... and knock the jammer off if it doesnt alert or jam before i knock it off i will think nothing of it!!

    i will also knock the jammer off so that they can get a speed reading!
    which will be under the limit!!

    also if i get lasered..... and obviously it will jam i will do the above but i will remove the jammer when i'm home!!

    are there any jammers which just disconect from the loom!

    basicly like disconecting your radar detector!!

    are there any jammers which just pul out without taking all the wiring loom with them!!

  2. #2
    Administrator
    Join Date
    Nov 2004
    Location
    Morristown, Arizona, United States
    Posts
    3,300

    Default E4 Error Code

    I have seen E4 error codes with Shifer ZR3 jammers, not with the Blinder jammers
    RadarBusters.com
    Motorcycle Mounts and Accessories
    Also Join me at -
    Twitter: RadarRoy
    Facebook: Roy Reyer

  3. #3
    Radar Fanatic
    Join Date
    Mar 2005
    Location
    Staffordshire, Uk
    Posts
    1,999

    Default ...

    cheers roy...

    i could do with knowing what all the error codes mean......

    jammer test do you know what all the error codes mean?

    jammers are illegal over here in the uk well only using them at the moment is and i'm wonering what error codes jammers give off!

    and are their any jammers that are easy to remove.... and put back in!

    probibly bullit connect them so they are easy to remove in the event the cops come around!!

    they have put the vans on the M4 trip speed is 79mph!! on a motorway!

    this is why i'm now very very tempted to get a jammer!!

  4. #4
    Banned
    Join Date
    Mar 2005
    Location
    Seattle
    Posts
    2,854

    Default

    Error codes are defined in the manuals. Officers should know what each error code represents because they run into them all the time. LTI 20/20's are very sensitive and have great error trapping, which is why they always show error codes.

    Chris

  5. #5
    Advanced Member
    Join Date
    Feb 2005
    Location
    Southern MA
    Posts
    10,127

    Default

    Quote Originally Posted by JammerTests Webmaster
    Error codes are defined in the manuals. Officers should know what each error code represents because they run into them all the time. LTI 20/20's are very sensitive and have great error trapping, which is why they always show error codes.

    Chris
    Is that why the LTI 20/20 markman is hardly in use now?

    Spoiler: show

    Radar Detectors-V1 & BEL v995
    Laser Jammer-Laser Interceptor Quad
    GPS Camera Locator-Cheetah C100
    GPS Nav-Garmin nuvi w/Trapster
    CB Radio-Galaxy DX-949 w/Wilson 500
    Scanner-RS Pro-96

  6. #6
    Banned
    Join Date
    Mar 2005
    Location
    Seattle
    Posts
    2,854

    Default

    You don't see the Marksman anymore because LTI stopped making them. They were replaced by the LTI 20/20 100LR, 100, LR B, 200, 200LR, and LTI compact.

    Chris

  7. #7
    Good Citizen
    Join Date
    Feb 2005
    Location
    uk
    Posts
    82

    Default

    im using the m20x on one vehicle but you couldnt remove them very quickly and ive just got hold of 2 target lt450's.thats the lt400 laser remote(jammer)and the home pick-up/switching unit to operate security lights or garage door opener on arrival.the lt 400 unit is a nice size single unit but my main point is that the loom from it is terminated with a plug a few feet down that then plugs into another loom plug that then goes to the interior.so if you had the sensor mounted and wired up but needed to remove the obvious bit before the police inspection- its unit off its mounting bracket (or heavy duty velcro)and unplug the lead in the engine bay from its connection plug and no jammer,2-3 minutes tops

  8. #8
    Radar Fanatic
    Join Date
    Mar 2005
    Location
    Staffordshire, Uk
    Posts
    1,999

    Default jammer

    that sounds great.... that might be just the thing!

 

 

Similar Threads

  1. LTI 20-20 Error codes and button functions(upadate question)
    By KnightHawk in forum Laser Jammers - General
    Replies: 13
    Last Post: 12-30-2007, 09:24 PM
  2. How easy is it for police to detect laser jammers?
    By RanchBroker in forum Laser Jammers - General
    Replies: 19
    Last Post: 06-27-2006, 06:51 PM
  3. lti error codes........lti marksman and ultralyte..
    By laserblaster in forum Laser Jammers - General
    Replies: 5
    Last Post: 05-08-2006, 08:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •