Originally Posted by category4
|
|
|
|
|
Re: OK I finally Veiled the Headlights on the F-150
Re: OK I finally Veiled the Headlights on the F-150
mk..im going with the same idea as erickonphoenix, where he has a kill switch for his jammers and when hes hit he leaves them on until he gets down to psl then turns them off..except with me im not going to be able to get the expensive stuff and am just needing that little bit of cover to give me a chance to get to the psl....hope that made some sense...
Re: OK I finally Veiled the Headlights on the F-150
Even if you get the Super duper ultra high power LI quad for the front and quad for the rear and don't use the kill switch once you get to PSL, DJ and I will hunt you down and revoke your jammer priveledges.Jamming LEO's JTG is a stupid move that will ultimately get jammers banned in your state. Let them get the new and improved reading and everyone goes away happy. Don't spoil it for everyone just so you can have 30 seconds worth of fun.
Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
LI Quad (On Ice Cream Truck)
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)
2008 Corvette Z-51 Coupe
Escort 9500 ix (Cadillac SRX)
Re: OK I finally Veiled the Headlights on the F-150
just did mine too....
Last edited by siRman20; 02-10-2009 at 05:13 PM.
Re: OK I finally Veiled the Headlights on the F-150
Looks like it turned out pretty darn good. Where did you find the airbrush gun? Did it take you long to figure out how to use it and get it to coat properly?
Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
9500ci (On Vette)
LI Quad (On Ice Cream Truck)
LI Dual (On SRX, 7.06 CPU)
ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)
2008 Corvette Z-51 Coupe
Escort 9500 ix (Cadillac SRX)
Re: OK I finally Veiled the Headlights on the F-150
Nice job
Re: OK I finally Veiled the Headlights on the F-150
ive been a painter off and on you can buy the sprayer for 5.00 at home depot or paint store... it works real good if you know what your doing, you got spray several little light mist coats in dust free lil area and warm w lil heater it takes awhile to do when your done just put the cap on the jar for next time the straw is short a hair and the sprayer wont get every drop out bottom jar, if you get carried away with spraying too much, it will use the whole can of veil but it turns out smooth, even, clean, and jtg i did yesterday i redo every 6mo.s i got ambushed today 12 over by a biker at 500ft behind a sign he looked hard holding his ultralyte he followed me too for 4 miles nothing happened it had to jtg i have only m25's with the plate above them w veild lasershield
Last edited by siRman20; 02-02-2009 at 08:13 PM.
Re: OK I finally Veiled the Headlights on the F-150
^
You can get those sprayers from Michael's or Hobby Lobby...
Just make sure to clean them with bestine (quoted from Erick) or some other solvent after you used them.
Re: OK I finally Veiled the Headlights on the F-150
Is that first close-up of the headlight after Veil was applied, or are you just showing off the strobe? If that's with Veil, that looks awesome!
"Buy the BEST and screw the rest." - fire65
"im intrested to see how well you do.i never seen a car JTG before would be a first for me.." - radarrob
Re: OK I finally Veiled the Headlights on the F-150
yea that was the second coat on that pic its slightly tinted than factory there very bright chrome looking i put 6 coats on total brightness is just fine at night
Last edited by siRman20; 02-10-2009 at 05:11 PM.
Posting Permissions
Reply With Quote
Bookmarks