I recently received a question about whether or not Veil should be applied to the rear of the automobile.
I will do my best to answer that question in this new forum which will serve to alert us all to localized/regionalized laser [or radar] speed traps and methods.
In my opinion, whether or not you want to treat the rear of your automobiles with either VEIL and/or laser jammers really depends on how police speed traps are conducted in your particular driving area.
In general, I believe, that by and large most laser and/or radar encounters will originate from the front. I undertsand, that there are some areas that are targeting vehicles from the rear.
In some parts of Canada it is where intercept [radar] and laser are used and radar detectors are illegal. Despite the advances of RDD technology, such as VG2 or Spectre (I-III) and the immunity provided by RDDD countermeasures employed by the better detectors, you may still be subject to detector confiscation and/or pull-overs.
Why?
It's rather really simple: Speed traps, I have been told, are being conducted in these areas with the targeting officer located on the on-ramp of a highway overpass. All the officers do is target the vehicles from the rear with either radar or laser and simply watch for which ones hit their brake lights.
In these cases, it rather obvious that the driver is utilizing a detector of some sort, eliminating the value of RDD immunity as they visually determine who is operating a radar detector.
Prett sneaky isn't it?
This was just one example why and where targeting may occur from the rear. I am sure there are others [which I hope will be posted by this forum's readers].
Remember if you are going to use VEIL in the rear, make sure you own a radar detector that really performs well with rear encounters and is positioned without rear obstruction [so that it can "see" the rear laser].
A plus about VEIL (and/or jammer) usage from the rear is - to get the angle right - most encounters from the rear [using an on ramp] will likely occur at least 500 feet or 130 metres given the length of most on-ramps.
This helps.
Honestly, though, I don't believe VEIL will be sufficient, in many cases, at making you car invisible to laser at much under 1500ft or 500 meters from the REAR. The reason? VEIL can't hide what it doesn't cover. The rears of most cars/trucks tend to be pretty flat and vertical which makes for great laser reflection (particular if they're light coloured) even if the lights and plate are completely treated with VEIL. And don't forget the CHMBL!
In tests, I have even seen some active laser jammers struggle in completely obscuring the rear.
Next year at SML's '05 test we will be performing tests of VEIL in combination with Blinder's products to see how the pairing does on reducing suspectability to speed detection from the REAR with laser.
I am very optimistic about the possibilities and will share our results when I have them.
For now, VEIL usage in the REAR will certainly help you - will it be enough? time and experience will tell us. Until then, I would be cautious and look at either a Blinder M40 and/or Blnder M40 and VEIL front/back to have the ultimate countermeasure system devised.
One final note about REAR usage. Although rare, I have been told that moving laser is coming - that is police laser that is somehow mounted in-vehicle and can be operated while in motion. If those products do indeed surface, rear targeting will likely climb as a percentage of all laser encounters.
The Veil Guy 8)
Bookmarks