Resetting Jammer with Cheetah?

[Jarus187]

I'm running the Blinder M25 with the Cheetah Wireless Kit. Is there any way to reset the jammers after a laser hit? Would you just use the on and off button on the remote? Because when I do that, it doesn't do the self test again and I'm always afraid that my jammers are still off after the initial hit.

Thanks.

[crazyVOLVOrob]

turn the jammer off and then turn the jammer on...then the jammer is reset

[Jarus187]

turn the jammer off and then turn the jammer on...then the jammer is reset

I know to do that...its just that I'm using Cheetah, and I don't have access to my Blinder's On/Off switch (its under the hood of my car). The only access I have to it is through the Cheetah Keychain Fob, which should turn it off:

http://www.speedcheetah.com/scshop/s...TEALTHnode.jpg

The thing is when I press the off button, the Blinder doesn't restart and do test mode.

[RacerX]

Are you confirming this by looking under the hood at the LED, or because you aren't hearing any new alerts from it after reset?

if you tucked the LED in the waterproof box, you can let it "hang out" so that you can look at it and test the Stealthnode by watching it when you hit the keychain.

Always press the on/off buttons for 1 full second and you'll be fine.

also, just to confirm, you wouldn't be using the blinder on/off switch with the kit, as it's not needed.

[Jarus187]

Are you confirming this by looking under the hood at the LED, or because you aren't hearing any new alerts from it after reset?

if you tucked the LED in the waterproof box, you can let it "hang out" so that you can look at it and test the Stealthnode by watching it when you hit the keychain.

Always press the on/off buttons for 1 full second and you'll be fine.

also, just to confirm, you wouldn't be using the blinder on/off switch with the kit, as it's not needed.

Thank you!