Printable View
I have #6 Arrow Down in programming but on start up there's no indication that I notice at least that in fact V1 is not in factory set mode.
I double checked and yes the arrow is down.
Wondering if in fact the feature is on or off? What am I missing?
You're not missing anything. When you turn it on you will see the flashing P indicating that a program change has been made from factory settings. Don't worry,gaurd is off when the arrow is down.Quote:
Originally Posted by 3kushn
Well I just checked it out again. I get no flashing P with 6 on or off on start up.
The only indication that programming has change from factory is in Programming Mode.
The 3rd led in the Strength Meter is off when #6 Arrow is down.
Mine (one week old) operates the same way...it displays P-O-P on startup with POP on; doesn't display a flashing P at all with mute options enabled
Quote:
Originally Posted by 3kushn
Quote:
Originally Posted by 3kushn
Quote:
Originally Posted by 3kushn
Two Noobies (less than 10 posts each) whinning about a lack of understanding of their brand new device.Quote:
Originally Posted by JetNoize
-RTFM-
from the prohibited VR site:
"On V1s with software version 3.891 and higher, P will indicate Band Programming changes only. The Band indicators (Laser, Ka, K, X and Decimal Point for Ku) will flash if the corresponding Band is On and remain dark if the corresponding band is Off."
Sorry Old Goat for asking such a dumb question. Maybe a Newbe on this forum but been running V1 since it came out. The Fat One. When Mike left Escort I went with him.
So guess your answer is: There is absolutely no difference in boot up from factory settings or custom unless an entire Band is turned off. Well no that's not the case, at least with t. The t flashes when turned arrow down on boot up. Don't have the time or inclination to go through all the options and list them here and I realize you simply pasted off the site instructions. Well they aint accurate. or Less than understandable for this old goat.
Yes this is could all be a minor issue as long as its simply a software oversight with the lights. But not if programming features aren't being set the way we want them.