V1/RX65 hardwire question

[Scammed by Scorpion]

So I now have a V1 and an RX-65 and was wondering if I can use the direct wire adapter that came with the V1 to power up the RX-65? I ohmed out the connectors they appear to be the same but I was looking for confirmation. I'm not trying to use the smart cords or anything, it would just be nice to install the V1 direct wire adapters in all my cars so the RD's can be interchangeable without having to move the cords. Thanks for your help.

[RadarRick]

That's a tought one, and i can't help you there because it's a bit to techy-wecky
RR

[Sparkknocker]

Thanks for posting RR? Yeah you can power up the 65 just fine with the V1 hardwire kit and vissa versa.

[cdilln]

X2....I had an X50, an RX65 and own a V1 and I am currently using the same hardwire connection. Never any problems here.

[bauzer71487]

Thanks for posting RR? Yeah you can power up the 65 just fine with the V1 hardwire kit and vissa versa.

Yep. Do it all the time.

[RadarRick]

Thanks for posting RR? Yeah you can power up the 65 just fine with the V1 hardwire kit and vissa versa.

Yep. Do it all the time.

Apparently you can. I just found that out :wink:
RR

[Scammed by Scorpion]

Thanks for the answers. I'm gonna go ahead and wire it up.

[AirMoore]

Thanks for the answers. I'm gonna go ahead and wire it up.

Just dont try to use the RX65 smartcord with the V1... :wink:

(It works you just cant mute or switch Modes).

[Synbios]

The X50/RX65 smartcord can be used to hardwire a V1. However, obviously the smartmute button won't do anything.

If you use the smartcord to hardwire a V1, you won't be able to press that big knob button on the V1 to lower the volume. Other than that, it works decently. I don't know why this happens, but I really wouldn't recommend doing this.

I'm not sure about the direct wire, but this problem might be with that as well. I'd check your big button.