Results 1 to 3 of 3
  1. #1

    Default Beltronics rx65: Cig. adapter flaking out ??

    When I plug it into the cig lighter, the 2 lights on the cig adapter jack flick on for a flash, and then go back out. The radar detector is effectively dead. This has happened in the past, but I have no recollection of how it was fixed. Any ideas?

  2. #2

    Default Re: Beltronics rx65: Cig. adapter flaking out ??

    If the RD was powered off via its power button, then it stays powered off until you press its power button again. It could also be that your RX65's firmware settings have gotten a bit corrupted due to a voltage spike or voltage drop. This is easy to fix. With the RD plugged in, try simply pressing the power button and see if your RX65 powers up. If not, hold down the RX65's City and Brightness buttons (the same two buttons which you use to go into Program mode) and while holding down these two buttons press the power button. Release all three buttons once "RESET" is displayed on the LED screen.

  3. #3

    Default Re: Beltronics rx65: Cig. adapter flaking out ??

    DOH ... I never even use the power button!!
    That "fixed" it thanks !!!!



Similar Threads

  1. Does Escort C65 =Beltronics RX65?
    By tpshi70 in forum Escort
    Replies: 4
    Last Post: 11-25-2009, 09:35 PM
  2. V1 vs. Beltronics RX65
    By mgloggia in forum Valentine One
    Replies: 27
    Last Post: 03-13-2007, 11:26 PM
  3. V1 vs Beltronics RX65
    By bman33 in forum Valentine One
    Replies: 17
    Last Post: 03-08-2007, 06:03 PM
  4. Beltronics RX65 questions...
    By afboy143 in forum Beltronics
    Replies: 4
    Last Post: 01-04-2007, 02:32 AM
  5. Beltronics Pro RX65 Measurements
    By Eric2006 in forum Beltronics
    Replies: 3
    Last Post: 10-30-2006, 09:20 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts