If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
I would try to find someone to talk to and see if you can tell how far you can talk in miles. Im concerned the filter is killing your output watts, thus making it hard to get a radio check. Try a radio check with the filter and without and ask the reply to see if they can hear you with the filter on.
Yeah I will have to try that tomorrow. Even today when I did not have the filter on, I only had two people talk back to me. One guy was a good ways away. He actually asked for a radio check.
__________________ V1Highway / Travel detector 3.864 , POP on, All bands on, Modded COLOR concealed display by me (Languy99**HINT**HINT**),
Hard wired, Mounted above rear view mirror.
Blinder M-25Highway/Travel Jammer
Custom mounted and installed.
Bel 955 Local detector
High mount, Hard wired, City No X, POP off
Whistler Pro 58 Dad's car High mount , Hard wired, City 2 ( No X),
CB Radio Highway / Travel Uniden Grant LT, Wilson Little Will Antenna
GPS - Highway/Travel
Garmin Nuvi 260 - With Trapster Database
I have a radio shack SWR meter that has power measuring and I can use the to measure the output could I not? Just hook it up after the filter and see what is reads, right?
__________________ V1Highway / Travel detector 3.864 , POP on, All bands on, Modded COLOR concealed display by me (Languy99**HINT**HINT**),
Hard wired, Mounted above rear view mirror.
Blinder M-25Highway/Travel Jammer
Custom mounted and installed.
Bel 955 Local detector
High mount, Hard wired, City No X, POP off
Whistler Pro 58 Dad's car High mount , Hard wired, City 2 ( No X),
CB Radio Highway / Travel Uniden Grant LT, Wilson Little Will Antenna
GPS - Highway/Travel
Garmin Nuvi 260 - With Trapster Database
well I just tested my power after the filter and it is exactly the same as without it, and exactly the same if I turn the filter to max or off. So it is not affecting my power.
__________________ V1Highway / Travel detector 3.864 , POP on, All bands on, Modded COLOR concealed display by me (Languy99**HINT**HINT**),
Hard wired, Mounted above rear view mirror.
Blinder M-25Highway/Travel Jammer
Custom mounted and installed.
Bel 955 Local detector
High mount, Hard wired, City No X, POP off
Whistler Pro 58 Dad's car High mount , Hard wired, City 2 ( No X),
CB Radio Highway / Travel Uniden Grant LT, Wilson Little Will Antenna
GPS - Highway/Travel
Garmin Nuvi 260 - With Trapster Database
I have one other question, can I replace the standard 36" whip with the wilson short load whip for better range, I know they are both the same overall height but electrically the short load one is much higher. Wilson Antenna - Short Load Adapter
__________________ V1Highway / Travel detector 3.864 , POP on, All bands on, Modded COLOR concealed display by me (Languy99**HINT**HINT**),
Hard wired, Mounted above rear view mirror.
Blinder M-25Highway/Travel Jammer
Custom mounted and installed.
Bel 955 Local detector
High mount, Hard wired, City No X, POP off
Whistler Pro 58 Dad's car High mount , Hard wired, City 2 ( No X),
CB Radio Highway / Travel Uniden Grant LT, Wilson Little Will Antenna
GPS - Highway/Travel
Garmin Nuvi 260 - With Trapster Database
It wouldn't give you any performance increase, and it would probably screw up your SWRs significantly. The Lil Wil is designed to have a 36 inch whip. 36 inches ELECTRICALLY AND PHYSICALLY. That is what the base load is designed to couple with. If you put the short load on there, you have an immediate mismatch, because the short load is only 36 inches physically, but it is 62 inches ELECTRICALLY. What you end up with is an antenna that is electrically at a band length for frequencies lower than those you are utilising, resulting in decreased performance and increased mismatch/SWRs.
If you're used to sleeping with a five foot woman, and a six foot man tries to slip into bed with you, would you notice? Would you perform normally? There ya go.
__________________
LTI Ultralyte LR-B | Kustom ProLaser III | Stalker LZ-1 | Stalker ATR 34.7 Ka Radar
__________________ V1Highway / Travel detector 3.864 , POP on, All bands on, Modded COLOR concealed display by me (Languy99**HINT**HINT**),
Hard wired, Mounted above rear view mirror.
Blinder M-25Highway/Travel Jammer
Custom mounted and installed.
Bel 955 Local detector
High mount, Hard wired, City No X, POP off
Whistler Pro 58 Dad's car High mount , Hard wired, City 2 ( No X),
CB Radio Highway / Travel Uniden Grant LT, Wilson Little Will Antenna
GPS - Highway/Travel
Garmin Nuvi 260 - With Trapster Database
Radar Roy's Detector and Jammer Buyer's Guide!
For pros or novices, this FREE 22 page consumer report is a must read for anyone considering any speed counter measure device. Radar Detector Buyer's Guide
Visit RadarBusters for all your Speed Countermeasure Equipment RadarBusters.com
Re: CB noise is driving me insane 
