Search:

" "Surges," hence why your detector has a fuse so if it does get surged the fuse will blow and not the detector. One more note, I have a Scan Gauge II and I've never seen any surge of voltage or...

Mockup the install and measure the source voltage on the detector end of the cable before installing. This way you can be sure the voltage drop wont have any impact. Ive tested both my V1s and the...

Try a lower spot on the windshield, like just below the mirror. It will effect overall range but it might stop the Kband pickup.

Its called SMPTE time code. Been around for awhile now..

You may have better luck with a TV remote...

http://www.radardetector.net/viewtopic.php?t=26422&highlight=

I dont believe these devices are using an interrupt to wake-up. There is just a simple switch to supply power or remove it. Thats all that is required for these specific embedded devices. The only...

I agree unplugging would be less likely of an issue but if a small static charge can damage electronics a 12-14 volt charge could be potentially be worse. It’s a totally different scale but: pulling...

Unplugging should not be an issue however plugging it back in can sometimes be an issue. It depends on the design.

I dont understand how static shock is an element in this discussion. It is a...

thats due to the transmitter not being anywhere near your brain, the audio is mearly sent via BT but all the tx and rx is still done at the phone..thats why it is safer.[/quote]

Bluetooth is a...

:roll:

SMD = Surface Mount Device
SMT = Surface Mount Technology

Yes, its a SMD based on SMT. Stop quibbling about semantics..

It did come up...



Red leds are cheaper.

You have 2 choices for part installation:

1) By Hand
2) By machine - Pick and Place machine.

1) is alot more $$.
2) is cheaper than 1) but requires parts to be purchased by the reels. ->...

Look for SMT (Surface mount), 1206 package (size and shape), with a Vf (forward voltage) of 2.0V - 3.0V @ If (forward current) of 20ma. Pick the colors of your choice...If you need any more help than...

Its not done because its cheaper to stock one kind of led (Red, 1206) than 4 or 5. This is the only reason. People can go on and on about aesthetics and the effects of color on the eye but in the end...

They dont seem to actually acknowledge them as refurbished. Ask for one of their "returned" units from their 30-day evaluation policy. They told me there was one in when I asked and it shipped that...

http://img2.putfile.com/thumb/8/22311141665.jpg

I dont believe there's a clear winner here. The V1 is capable of reporting more sources than the X50 however it is a bit easier with the X50 to see how many of each type are in the area.

In my...

This is a problem with any of the detectors capable of simultaneously showing multiple incomings.

Even with the excellent combination of strength-meter, Bogey-Count, the arrows, and its awesome...

The temperatures are dictated by the IC component class. The temperatures listed for the V1 are commercial grade temperatures. Same temperatures for the IC components used in your old Escort X50,...

I posted that and if you follow the link:

Temperature Range:

Operating: -20°C to +70°C (-4°F to +158°F)
Storage: -30°C to +85°C (-22°F to +185°F)

..at a risk of sounding redundant, do not...

Maybe, maybe not. Depends on what vehicle. I'd trust my VW with my life, plus a number of other cars, too.[/quote]

Maybe we are thinking of different speed ranges. Ive done 140-150mph on that...

:?: I dont think he is looking for an audio mute solution...The wire in the cord is just a simple signal to mute the V1.

http://www.rane.com/note109.html

I believe both the V1 and LPP are unbalanced, mono outputs so you should be able to use the first schematic. Someone please chime in if you know otherwise.

Did you see anything within the statements that I made that are fiction? The comments are based directly on the original images. My comments were not in reference to the stalker but rather this...