ZR4 install on my 2003 Buick Century

[Qui-Gon]

Well, at long last, I finally received and installed my Shifter ZR4. Any and all opinions/criticisms welcome!!!











Thanks for looking!

[category4]

Location on the front heads looks great. Hard to tell from the pictures but I'm sure you got them square and level to the road.

Hope you can get them tested soon would love to know how it does.

[Stealth Stalker]

Looks great! Is that a Veiled cover on your front plate? As long as you are addressing the plate issue, I predict extremely low numbers on most guns!

[Qui-Gon]

Looks great! Is that a Veiled cover on your front plate? As long as you are addressing the plate issue, I predict extremely low numbers on most guns!

Indeed it is a Veiled LaserShield on my front plate...

[Qui-Gon]

Location on the front heads looks great. Hard to tell from the pictures but I'm sure you got them square and level to the road.

Hope you can get them tested soon would love to know how it does.

Thanks much! I'll tell you, it was a b*%$h getting them leveled! I used 3M molding tape to attach the brackets to the grille. What helped is that where the grille clips onto the front of the car, there are 2 ever so small edges which are perfectly straight to the road. I overcut the grille in spots, so I had to compensate with a few extra pieces of the 3M molding tape. I have a small circular level with 2 bubbles. I got it as close to level as I could get, given the space in which I had to work. In making sure the heads were pointing straight ahead, I used a yard stick against the emblem in the center of the grille.

As far as getting them tested, noone would love to know more than I!!! I'm taking a small road trip tomorrow morning...hopefully the NYSP will be running LIDAR.

[newkid]

As far as getting them tested, noone would love to know more than I!!! I'm taking a small road trip tomorrow morning...hopefully the NYSP will be running LIDAR.

Looks like a good install... seems that it's wasn't easy

When testing w/ LEO's just keep it about PSL. Try to do your testing to find out the PT's

[snoopyc4]

Nice install

[Qui-Gon]

I just put a coat of VEIL on the rear end of my car and rear plate. We'll see how it looks in the morning...

[MEM-TEK]

Nice. I notice that everything is black behind the grille too. The front shifters look to be mounted in optimal positions and with that black car and the Veil they should perform very well.

[stlcardsfan]

Nice! I wonder if you are the first person to put a jammer on a Buick. I just can't see your typical Park Avenue granny with a custom installed jammer that her husband had put on for her.