'03 Maxima - V1 and Blinder M25 Install

**Zapple** · 10-10-2008 03:47 PM

My first countermeasures ever. Any comments or friendly criticism is appreciated

. Blinders are J15 and V1 is 3.561. Yes I know, I need gas. Yes I know, I'm going to use sharpie on the molding tape

.

Car

V1

Wire from V1 and...?

Cheetah wireless fitting kit receiver

Jammers

Front windshield

Under hood

Under seat

**Google Adsense** · 10-10-2008 03:47 PM

**hockey005** · 10-10-2008 05:49 PM

nice

**Cips** · 10-10-2008 06:42 PM

What do you have wired directly to your battery?

**Zapple** · 10-10-2008 10:47 PM

Originally Posted by hockey005

nice

Thanks

Originally Posted by Cips

What do you have wired directly to your battery?

Cheetah Advanced Technologies Ltd > Wireless fitting kit for laser systems

**focalcivic** · 10-11-2008 08:35 PM

Man, were you saving tape? I would of put tape along the entire top of the head instead of just the middle, just for extra security. I know the tape is strong but covering the entire head would give you peace of mind.

**erickonphoenix** · 10-11-2008 08:54 PM

Very nice install! Will you need to run a front plate? If so the heads sitting on either side will be great spot. But of course I suggest running some kind of fake plate if you can.

**Zapple** · 10-11-2008 11:25 PM

Originally Posted by erickonphoenix

Very nice install! Will you need to run a front plate? If so the heads sitting on either side will be great spot. But of course I suggest running some kind of fake plate if you can.

Thank you. Hehe, do you not remember this thread?

Do CR8APL8's not reflect?

Originally Posted by focalcivic

Man, were you saving tape? I would of put tape along the entire top of the head instead of just the middle, just for extra security. I know the tape is strong but covering the entire head would give you peace of mind.

I put a full strip along the rear of the head and two small pieces near the front to make the head level. It's not going anywhere

.

**erickonphoenix** · 10-12-2008 11:21 AM

Originally Posted by Zapple

Do CR8APL8's not reflect?.

No where near as much as a state issue plate with a state issue plate. Even with VEIL and a laser shield the state plates are a glaring hot spot.

**Zapple** · 10-13-2008 12:05 AM

Originally Posted by erickonphoenix

No where near as much as a state issue plate with a state issue plate. Even with VEIL and a laser shield the state plates are a glaring hot spot.

Since front plates are NOT required in Florida, and taking into consideration the placement of my heads do you think that a CR8APL8 would work well by itself? Or should I buy one along with a Laser Shield cover?

How about the black plate here with one letter on it?
http://cr8apl8.easystorecreator.com/...s/list.htm?1=1

OR, by looking on eBay I can find a blank black plastic plate. Would a LEO really try shooting a black front plate though?

**REBinc** · 10-13-2008 02:16 AM

I would recommend finding power some other than your battery. You should have a fusebox somewhere under your hood in addition to the one in your car.

Also, HIDE THOSE WIRES!