Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1

    Default Meaning of LEDs during V1 program mode

    I have spent quite a bit of time programming my V1. I notice that when power up the V1 it is giving you some sort of indication by only lighting a certain number of signal strength LEDs.

    This also shows when in programming mode.

    Does anyone know how to read these? Anyone have a chart?

  2. #2
    Radar Fanatic
    Join Date
    Apr 2006
    Location
    Big, flat, corn infested, boretown
    Posts
    2,083

    Default

    You will notice when you turn off a certian funtion ie X band, the strength meter changes, and turns off some led's. I guess it is for VR's usage, so they dont have to go through all of your settings when they get it for service. Its just a guess though.

  3. #3
    Radar Fanatic
    Join Date
    Jun 2006
    Location
    Glencoe, Illinois
    Posts
    1,623

    Default

    im pretty sure that the leds that turn are off mean that features of V1's 'full-protection' have been turned off

    like if i turn pop off it doesn nothing, but if i turn X or K band off an led goes off

  4. #4
    Lead Foot
    Join Date
    Feb 2006
    Location
    MI
    Posts
    382

    Default

    dunno id go with richards guess i noticed the same thing...

  5. #5
    Radar Fanatic
    Join Date
    Jun 2006
    Location
    Glencoe, Illinois
    Posts
    1,623

    Default

    i can confirm it in 30 mins

  6. #6
    Radar Fanatic
    Join Date
    Jun 2006
    Location
    Glencoe, Illinois
    Posts
    1,623

    Default

    in programming modes for numbers

    each number turn off a led from right to left

    i.e.

    1st option turned off the 8 led
    2nd option turned off the 7 led
    4th option turned off the 5 led
    etc.etc.
    this is what it looked like when all of the number options were turned off(arrows pointing down) when turning on



    then when you scroll to the letters all the leds reset but when u go back to the numbers the ones that were out before are still out..comprende?

  7. #7

    Default

    Quote Originally Posted by richardboy316
    in programming modes for numbers

    each number turn off a led from right to left

    i.e.

    1st option turned off the 8 led
    2nd option turned off the 7 led
    4th option turned off the 5 led
    etc.etc.
    this is what it looked like when all of the number options were turned off(arrows pointing down) when turning on



    then when you scroll to the letters all the leds reset but when u go back to the numbers the ones that were out before are still out..comprende?
    If all the options are turned off (arrow down), then why are some of the LEDs still lit. Thanks

  8. #8
    Radar Fanatic
    Join Date
    Jun 2006
    Location
    Glencoe, Illinois
    Posts
    1,623

    Default

    This picture is just with the number options turned off..

    ok so theres like 5 videos consiting off
    All options off
    Just numbers off
    Just letters off minus J,u
    ALL letters off
    (if you want to see them i can upload otherwise im not going to)

    My Conclusion is:

    All number options as a whole use LED's(4,5,6,7) so during power up with all the number options pointed down, the first 3 LED's and the last LED lights up

    All letters minus J,u as a whole use LED's(1,2,3,8) so during power up with all the letter options pointed down, minus J,u, the 4 LED's before the last LED light up

  9. #9
    Radar Fanatic
    Join Date
    Jun 2006
    Location
    Glencoe, Illinois
    Posts
    1,623

    Default

    This picture is just with the number options turned off..

    ok so theres like 5 videos consiting off
    All options off
    Just numbers off
    Just letters off minus J,u
    ALL letters off
    (if you want to see them i can upload otherwise im not going to)

    My Conclusion is:

    All number options as a whole use LED's( 4,5,6,7 )so during power up with all the number options pointed down, the first 3 LED's and the last LED lights up

    All letters minus J,u as a whole use LED's( 1,2,3,8 )so during power up with all the letter options pointed down, minus J,u, the 4 LED's before the last LED light up

  10. #10
    Old Timer
    Join Date
    Jun 2005
    Location
    New Hampshire
    Posts
    6,806

    Default

    If you turn a band off (X, K, Ka or Laser), the bands that are still on will flash their band indicators during power-up. For example, if you turn X off, K, Ka and Laser will flash.

    POP is indicated by the P...o...P during power-up, so turning POP off doesn't change any LEDs. Turning on Ku makes the decimal point flash during power-up.

    All the other options (K automute, Ka false guard, etc.) have a designated LED on the strength meter, which will be on when enabled or off when disabled.
    If I'm passing you on the right, YOU are in the wrong lane!

    If speed kills, how come I'm still alive?

    Active Countermeasures: V1 3.858, Escort Redline, Beltronics STi-R+, LI Dual 7.1x CPU/8.7 Heads (front)
    Other/Backup Countermeasures: V1 3.813 (loaned to friend), Beltronics Pro RX65 M4 6.3
    Vehicle: 2002 Audi A4 1.8T Quattro
    LEO Toys: Kustom Pro Laser II & III
    Encounters/Saves August 2011: Radar 3/1, Laser 0/0


 

 

Similar Threads

  1. LEDs
    By aa2033 in forum Car Talk
    Replies: 7
    Last Post: 12-29-2010, 09:13 PM
  2. How to program V1 to turn of POP mode...
    By sheeed in forum Valentine One
    Replies: 3
    Last Post: 07-17-2010, 11:14 PM
  3. Question About Program Mode
    By Sampson in forum Valentine One
    Replies: 3
    Last Post: 09-25-2009, 07:35 AM
  4. Program Mode?!?
    By pbboy37 in forum Valentine One
    Replies: 5
    Last Post: 07-16-2008, 07:37 PM
  5. Bel 795 leds
    By astroboy in forum Beltronics
    Replies: 3
    Last Post: 11-29-2005, 02:09 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •