Does anyone have the specs on what happens to the data lines when the mute button is pressed on a valentine concealed display.
When you hit mute on a bel/ escort product the yellow lead goes to ground (actually ground via a resistor) .
The reason we ask is simply because were going to add auto mute feature to our NavAlert gps for people who want to automatically mute their detector in set areas (parking lots with microwave door openers, toll both , drone area etc. Please only reply with specs if you have them, not comments about the feature or what were doing, this can be commented on in our other thread (http://www.radardetector.net/Automut...rms-16330t.php )
Were not looking to wire directly to the button but rather make a simple pass through connector however dont have a valentine here to test- am i correct , assoons as you attach the concealed display it turns off the main display, is it possible to add a external mute button on the power data lines - maybe someone has done this already.
Basically we want to plug a cable into the accesory plug which will give the correct signal to mute the detector.