Results 1 to 5 of 5
  1. #1
    Experienced
    Join Date
    Jun 2010
    Posts
    209

    Default v1 laser sensor, blinded by the sun, possibly? see this video where it fails to alert

    On friday, I came on an ohio state trooper who could clearly be seen leaning out the window of his patrol car with a laser gun.

    I cant guarantee he was pulling the trigger, but for how long I was in his line-of-sight, I would assume he was.

    I got nothing, no warning.

    Now, this is on an 09 silverado truck, with the v1 mounted high by the rear view mirror - away from typical aiming points.

    Despite all that, I still feel like it should have alerted. Especially since V1 1.8 laser detection is supposed to be cutting edge.

    possible laser alert failure due to sensor overload (from setting sun)

    http://www.youtube.com/watch?v=FNcZk...eature=channel

    I have had an alert from the v1 with laser (sorry this is a bad video), and Ive had my v1 3.872 in to v1 for them to test it out. They said it works fine.

    Heres a video showing a successful laser alert from the same detector.
    http://www.youtube.com/watch?v=RRN2s...eature=channel

  2. #2
    Rocket Driver
    Join Date
    Jun 2008
    Location
    GA
    Posts
    8,717

    Default Re: v1 laser sensor, blinded by the sun, possibly? see this video where it fails to a

    50/50 that a radar detector (even a V1) will go off if the LEO targets low on the vehicle or the range is under 500'. Jammers are your only protection, even if the RD does go off the result is the same.
    Valentine One (3.858 Ice Cream Truck, 3.812 in Vette)
    4 Head LI (On Vette) (7.11 CPU Regular heads front, HP Heads on the rear)
    9500ci (On Vette)

    LI Quad (On Ice Cream Truck)

    LI Dual (On SRX, 7.06 CPU)

    ProLaser II, ProLaser III, Stalker LZ-1, LTI Marksman & Laser Atlanta "R" (looking for an Ultralyte LRB)

    2008 Corvette Z-51 Coupe

    Escort 9500 ix (Cadillac SRX)

  3. #3
    snoopyc4
    Guest

    Default Re: v1 laser sensor, blinded by the sun, possibly? see this video where it fails to a

    Despite all that, I still feel like it should have alerted. Especially since V1 1.8 laser detection is supposed to be cutting edge.
    I've had my V1 miss laser speed traps entirely:



    It's not uncommon especially on trucks. With my LTI Truspeed, I've tested my setup multiple times and sometimes the friend that I get to drive my vehicle tells me the V1 never went off.

  4. #4
    Lead Foot
    Join Date
    Jan 2008
    Posts
    469

    Default Re: v1 laser sensor, blinded by the sun, possibly? see this video where it fails to a

    I think your V1 is probably okay. It's not uncommon to miss laser hits aimed at your headlight/center mass, especially with a high mount like your setup.

    My V1 is mounted next to the rear view mirror as well, and it has definitely not alerted to shots that my LI did pick up.

  5. #5
    Experienced
    Join Date
    Jun 2010
    Posts
    209

    Default Re: v1 laser sensor, blinded by the sun, possibly? see this video where it fails to a

    i think part of this might have to do with the high mount in the truck.

    It goes off a higher percentage of the time when its in my corvette.

 

 

Similar Threads

  1. another fail to alert to laser - captured on video
    By dizwiz24 in forum Valentine One
    Replies: 46
    Last Post: 10-27-2010, 05:18 PM
  2. Pro 78 v. K band Speed Sign(possibly video)
    By Tibby in forum Whistler
    Replies: 1
    Last Post: 06-30-2007, 01:13 PM
  3. V1 laser alert times - video
    By kpatz in forum Valentine One
    Replies: 2
    Last Post: 05-01-2006, 12:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •