-
Newcomer
Re: Tower broadcasting at 632 - 638 MHz

Originally Posted by
sclemmons
Wondering if this might be the problem, the tower is short and right in the middle of where I was testing last night.
Channel: 41 632 - 638 MHz Licensed
File No.: BLEDT-20030430AAX Facility ID number: 721
CDBS Application ID No.: 658788
30° 39' 33.00" N Latitude 87° 53' 33.00" W Longitude (NAD 27)
Polarization: Horizontal (H) Effective Radiated Power (ERP): 199. kW ERP Antenna Height Above Average Terrain: 185. meters HAAT -- Calculate HAAT Antenna Height Above Mean Sea Level: 209. meters AMSL Antenna Height Above Ground Level: 158. meters AGL
199 kw at 638MHz? WOW! That kind of power can easily generate harmonics of several watts in the mid GHz range at short distances. This would wreak havoc with a RD! That much power can even induce significant signals in the RD circuit board itself, bypassing the antenna entirely and overloading the front end. No wonder you are getting false alerts!
Last edited by wag; 07-10-2009 at 03:36 PM.
National 55mph speed limit enacted 1974

Countermeasures used:
-CB Radio 1974
-Super Snooper XK 1975
-Original Escort 1978

-Improved Escort (digital filtering) 1981
-Escort Solo 1989
-Electrolert Spybuster 1989
National 55mph speed limit repealed 1995

-Whistler Pro-73 (still using)
-Garmin Nuvi 255
-Whistler XTR-690SE (disappointing 34.7)
-Garmin Nuvi 1350T (new)
-
07-10-2009 03:13 PM
# ADS
Circuit advertisement
-
Moderator
Re: XTR 690 SE excessive Ka falsing
I will look into this source of interference and let you know what I can do to solve it.
-
Moderator
Re: XTR 690 SE excessive Ka falsing
I think I have a serious problem with the voice on my 690se...It keeps asking if I would like Fries with that.....I have yet to figure it out!!!....Just kidding
-
Radar Fanatic
Re: No additional falsing

Originally Posted by
sclemmons
I got zero false alerts on any band driving around today in the metro Mobile area. I think that this confirms that there is some unusual RF\Microwave\etc. near my home.
Do you live near Craig Peterson on a mountain?
-
Radar Fanatic
Re: No additional falsing
-Bel V955 S7
-8500 X50 S7
-V1 3.872
-
Radar Fanatic
Re: XTR 690 SE excessive Ka falsing

Originally Posted by
Michael B
I will look into this source of interference and let you know what I can do to solve it.
Mike B i know the filter modes are intended for leaky RD's but while i'm running in Filter 2 mode it never ever falses on Ka in Dallas/Ft.worth area. How ever in Filter mode it will pick up some Microwave towers K and Ka band. There is allot of these towers in that area. POP on increases these alerts by 40% more falses. In New Mexico there is a communication tower that leaks X band for 7-9 miles.
-
Radar Fanatic
Re: XTR 690 SE excessive Ka falsing

Originally Posted by
sclemmons
I just purchased two XTR 690 SE's to replase older Whistlers that were not performing well detecting Ka. However, both of them (in my car and in my wifes car ) are falsing to the point of being useless. They false on Ka, Ka POP, and Ka and K Pulse usually strength 9.
This happens in our driveway, in the neighborhood, city streets, county roads, state highways and the interstate. Without exageration, we are unable to travel even one mile without multiple Ka, (POP and Pulse) indications. There are a couple of locations in the neighborhood where I regularly detect specific Ka frequency IDs but my wife just gets a Ka strength 9 signal .(Unusually we get no Xband falsing even in Highway mode in places where our old detectors would always pick up door openers etc.).
Currently running Filter 2, Ka with frequency ID, X on, K on, POP, Safety Warning, etc. I will try turning off POP, Safety Warning, etc.
I have always read where Ka is alerting. It should be a real radar alert. I haven't heard of Ka falsing, only X and K band falsing.
-
Radar Fanatic
Re: XTR 690 SE excessive Ka falsing

Originally Posted by
milkman

Originally Posted by
sclemmons
I just purchased two XTR 690 SE's to replase older Whistlers that were not performing well detecting Ka. However, both of them (in my car and in my wifes car ) are falsing to the point of being useless. They false on Ka, Ka POP, and Ka and K Pulse usually strength 9.
This happens in our driveway, in the neighborhood, city streets, county roads, state highways and the interstate. Without exageration, we are unable to travel even one mile without multiple Ka, (POP and Pulse) indications. There are a couple of locations in the neighborhood where I regularly detect specific Ka frequency IDs but my wife just gets a Ka strength 9 signal .(Unusually we get no Xband falsing even in Highway mode in places where our old detectors would always pick up door openers etc.).
Currently running Filter 2, Ka with frequency ID, X on, K on, POP, Safety Warning, etc. I will try turning off POP, Safety Warning, etc.
I have always read where Ka is alerting. It should be a real radar alert. I haven't heard of Ka falsing, only X and K band falsing.
Ka falsing issues are Leaky RD's Cobra,Uniden,Safety alert,Older Bels and some microwave/transmission towers.
Bookmarks