View Full Version : Wow that stuff is dark ;-)
robert
05-02-2005, 05:05 AM
Applied my VEIL to the lights without issue, and didn't have a plate cover so started to apply it there. Applied directly to the plate (white MD plate) that stuff is pretty dark. Wiped it off before it has a chance to dry, guess I need to get a plate cover. :wink: Local auto parts place doesn't carry them so will have to look around or order one. FWIW, I used the brush.
brick
05-02-2005, 06:30 AM
I had the same trouble finding one and ended up getting one off the net. It's pretty dark since it's covered on both sides. I'm thinking of getting one of those laser shields from Roy and putting a single coat on instead. (Maybe even on the back since it won't erode that way?) I haven't been hassled by law enforcement yet, though. Half of the people around here drive without their front plate, anyway.
happya$$
05-02-2005, 08:11 AM
The laser shield is your best bet.
brick
05-02-2005, 08:13 AM
Does the laser shield make your plate appear fuzzy, or is it about as clear as a regular cover?
thestaton
05-02-2005, 08:32 AM
becareful with plate covers in MD around the whitemarsh area cops are AHOLES!!!!
happya$$
05-02-2005, 10:08 AM
The Laser Shield is pretty clear. You can hardly tell that one is on so you should be pretty safe
crazyVOLVOrob
05-02-2005, 10:56 AM
Does the laser shield make your plate appear fuzzy, or is it about as clear as a regular cover?i just have the laser shield on my car and to be honest it sort of does make the plate a little fuzzy buts it's hardly noticed the main thing that i notice is that the plate isn't as reflectives as it is without it but that is expected....I will have pictures posted soon of my VEIL application so the difference will be able to be seen...including one show the difference in headlights with VEIL with out VEIL
---------------------------------------------------------------------------------
Robert would your plate look something like this?
So...here's how my plate looks during the day
http://davidson.smugmug.com/photos/16578418-O.jpg
and here's how it would look in a night picture lit with flash (or any picture where the real lighting is the flash, to similate this I just used a fast shutter speed and a small aperature, giving the natural light very little time to expose).
http://davidson.smugmug.com/photos/16578419-O.jpg
Richard
sethy
05-02-2005, 01:26 PM
...nice veil job :lol:
Veil Guy
05-02-2005, 02:17 PM
robert,
Yeah, in the case of pure white background plates, VEIL is going to be more noticeable than on other coloured plates. A cover may be in order here.
I have post these before, but it may be worth lookin at again:
http://www.laserveil.com/images/veil-plates-untreated-1.jpg
untreated - VEIL coating removed
http://www.laserveil.com/images/veil-plates-treated-1.jpg
treated w/ one good coating
The plate on the left is an older NJ plate that is not retroreflective in nature. The plate on the right is a newer Jersey plate that is retroflective and may lend itself to one additional thin additional coating to completely quench out the effect of the retro-reflective material.
Please don't mind the dirt on the car; just went through a snow storm.
The Veil Guy 8)
L33T_Hacksta
05-02-2005, 04:34 PM
Thats exactly how my Maryland plate looked a few minutes ago till i took it off. Applied my Veil yesterday after 90% of the container spilled after I opened it :cry: I only had enough to coat the headlights and the plate. The headlights dont look very bad but the plate was just nasty and I had a devil of a time getting it off, windex did the trick but took me like an hour to get it all off! Im very pissed about spilling all my Veil though :evil:
-L33T_Hacksta
happya$$
05-02-2005, 05:03 PM
I had the samething happened. I spilled about 75% of it
Veil Guy
05-02-2005, 06:10 PM
I am curious guys, why did the product spill?
Would revising the container help, you think?
The Veil Guy 8)
happya$$
05-02-2005, 06:27 PM
Maybe make the container to where the product has to be squeezed out or maybe we are retarded :wink:
Regis
05-02-2005, 07:24 PM
I don't know how you could revise the container to make it any more spill proof and still be able to dip a paintbrush in it..? I do admit though, unless you are paying attention, it would be easy to kick it over as you are working around the car.
The thing I would suggest is doing something with the lid and the way it seals. After you shake it up, use the product and then put the lid back on, to me it seemed like the lid had little drips coming down from it endlessly, which really stinks when you store it and don't wait long enough or stick enough paper towel edges up into the groove between the lid and the jar to clean them all up.. :)
robert
05-02-2005, 07:24 PM
I am curious guys, why did the product spill?
Would revising the container help, you think?
The Veil Guy 8)
bob,
hacksta and i are friends, and i can tell you it's just the size of his feet that caused it to spill. i live 20 minutes away and he almost spilled mine too.
:twisted:
robert
05-02-2005, 07:25 PM
...nice veil job :lol:
my thoughts exactly :wink: might as well just put a cover on it and call it a day.
L33T_Hacksta
05-02-2005, 07:25 PM
I was inside my car getting the Veil Can and shook the container. After a few minutes I opened the container and put it on the ground. Didnt see where my foot was going and accidently kicked it with my foot. Now my street has a huge Veil stain on it now, atleast it cant be lasered. But just pissed about my stupidity :evil:
robert
05-02-2005, 07:27 PM
you don't apply it to the inside of the car, you apply it to the outside.
:twisted:
i never even opened my doors and i was able to apply it to the lights no problem. :roll:
Veil Guy
05-02-2005, 11:29 PM
L33T_Hacksta,
Were you able to get a full treatment out of VEIL even though you spilled it?
PM with your address and I'll see what I can do...
The Veil Guy 8)
L33T_Hacksta
05-03-2005, 03:55 PM
I was only able to do the front headlights as the license plate was just a mess, so took it off! I PM'ed you.
-L33T_Hacksta
fallen8511
05-04-2005, 10:23 PM
Now my street has a huge Veil stain on it now, atleast it cant be lasered.
:wink:
L33T_Hacksta
05-05-2005, 10:44 AM
Hehe, yeah I would hope enoygh rain would wash it away!
-L33T_Hacksta
robert
05-05-2005, 07:48 PM
Hehe, yeah I would hope enoygh rain would wash it away!
acid rain maybe! wasn't happy with how i applied it first time on my lights. windex didn't put a dent but rubbing alcohol took it right off. i'll reapply this wknd when my lasershield gets here :D