PDA

View Full Version : Laser Interceptor Wished Option



Eloi
04-04-2007, 04:39 PM
Under a laser control most people do close their unit to avoid JTG ....that is a long term smart strategy.

My suggestion :

Instead of completely shutting down the unit : it would be possible to keep the reception without the jam sequence .

Benefit : we could learn a lot about the behavior of Leo / laser gun.

Is there a point ?

I would call this option : Mute Jam...






:?:

whiterabbit05
04-04-2007, 05:04 PM
you mean have it alert to a laser encounter but not jam it when you press a switch/button? yea that would be kinda cool.

or you could just get a v1 =)

Eloi
04-04-2007, 05:21 PM
you mean have it alert to a laser encounter but not jam it when you press a switch/button? yea that would be kinda cool.

Exactely , you get the alert and jam... until you press a button ....could be a momentary switch....release it = back to jam.


or you could just get a v1 =)

Ur right ...I thought of it but in some circumstances even the most sensitive rd can miss the laser ...+ if you live in a banned area , you can't place the rd in a visible location.

But I am glad someone like the idea....cool

hookem202
04-04-2007, 06:57 PM
That would be a good idea but i have a feeling that the control box would have to be a lil larger to cope with the added computer boards. Plus not to mention the price would go up. If LI delivers their jammer like they say $400 for a dual head setup other jammers will become obsolete. We will sorta have a monopoly!

kpatz
04-04-2007, 07:20 PM
There wouldn't be any need for additional computer boards or a larger case... just one button and the firmware would suppress jamming after the button is pressed.

Heck, it might have a button already. Does it have any user functions; e.g. mute?

edweird
04-04-2007, 09:16 PM
The MUTE button on the ZR3 mutes the audio on the first press, and stops jamming on the second press. Alerts are still received, and it resets back to normal operation after a minute or so.

The laser alert lights will continue to indicate laser reception regardless of how many times you use the MUTE button.

LittleOverPSL
04-04-2007, 09:20 PM
I posted the same request a while back. The ZR3/LP905 does this - hit the Mute button twice. I think it's only in software - relatively low development cost. I think all these 'extra cost' arguments don't have much basis.

Think about it. The control box is 'firing' the diodes by turning it on and off in response to received pulse. It doesn't turn the receiver sensor off because it needs to receive the next pulse. If the current Mute button is used (say press twice in a second), then the software doesn't jump into the code that turns the diode on/off.

I don't see why *any* jammer can't have this feature.

Still think it will drive up the cost? Please provide some real basis for it, I love to learn more.

jws3
04-04-2007, 09:23 PM
Sounds to me like many here are indirectly saying that Lidatek was right all along- Don't JTG lest too many suspicions arise.

Synbios
04-04-2007, 10:06 PM
A lot of jammers have this feature..sort of a "stealth" feature.

You jam the LIDAR gun until you are safely within the speed limit, at which you hit the button to stop jamming and the officer can get your speed.
Excellent idea, I would definitely use it, even in areas where laser jammers are legal.

Remember, a cop can still pull you over with an estimate, but if he gets your reading on a LIDAR gun and it shows you're within PSL, all I can say is :p

jwardell
04-05-2007, 08:02 AM
Instead of completely shutting down the unit : it would be possible to keep the reception without the jam sequence .

That is exactly how my $150 laserpro 904 works. You mean to tell me the $600-1000 jammers don't do this??

Very important feature considering you want to kill the jamming as soon as you slow down to reduce suspicion, but you still want to know if you are being hit (especially a second time while it is still disabled for the 30 or 60 sec period). And your radar detector often will not alert it up as it is mounted too high.

Eloi
04-05-2007, 08:50 AM
Re-arming LaserPro 904
Once you have pressed the DIS
button, you can “rearm” the
blocking function without
waiting the 60 second time
period. To “rearm” LaserPro™
904 BEFORE the automatic 60
second time out expires, simply
press the DIS button a second
time. LaserPro™ 904 will be
ready to “block” the Laser
signals.
Note: If the LaserPro™ 904 is not
disarmed during a Laser encounter
it will continue to return blocking
signals whenever receiving further
Laser transmissions.

Seems like nobody has re-invented the wheel ....
some excellent features are lost by the new and shiny novelties ....

Even the wording shows the evolution .... from blocking to jamming ....

jws3
04-05-2007, 09:40 AM
There still is one problem with all the user dependent muting of jamming ideas: The user.

By the time the user is hit, awakens from his stupor, figures out what is going on and only them reacts by pressing some obtuse combination of buttons it's too late. I can see why a timer is a good idea. Lidatek had the right idea, but 5 seconds was too little. 7-8 would be better IMO.

TSi+WRX
04-05-2007, 10:18 AM
^ Drill, drill, and more drills.

As with anything else "tactical," one must rehearse time and again.

Even a set time to-shutoff cannot account for every situation.

I crested a hill and was engaged from under 300 ft. At 35 MPH (posted), I still had time to shut off my jammers AND do a mental "one-onethousand, two-onetho..." count before passing the cruiser.

:)

I think that yes, a timer-enabled disable function would be good, but allowing the end-user to directly interface and control this function should remain a must-have as well.

Eloi
04-05-2007, 10:34 AM
By the time the user is hit, awakens from his stupor, figures out what is going on and only them reacts by pressing some obtuse combination of buttons it's too late.

This true for a new user , or my wife :lol: she hates techthings ...

But for experienced user , it is better to have full control over our machine .

It would be great to have the Jam Mute , it is up to LI to implement .

TSi+WRX
04-05-2007, 10:42 AM
It would be great to have the Jam Mute , it is up to LI to implement .

+1 :)

LittleOverPSL
04-05-2007, 04:56 PM
By the time the user is hit, awakens from his stupor, figures out what is going on and only them reacts by pressing some obtuse combination of buttons it's too late. I can see why a timer is a good idea. Lidatek had the right idea, but 5 seconds was too little. 7-8 would be better IMO.
There is such a thing called default mode. Go ahead and set the default mode to N seconds. Then let the stupor deprived user do what they want, leave it on until N secs or double-mute it or single-mute it or turn the whole thing off.

Now it's up to the manufs to take this feedback and do what they want with it.

jwardell
04-06-2007, 08:30 AM
There still is one problem with all the user dependent muting of jamming ideas: The user.

By the time the user is hit, awakens from his stupor, figures out what is going on and only them reacts by pressing some obtuse combination of buttons it's too late. I can see why a timer is a good idea. Lidatek had the right idea, but 5 seconds was too little. 7-8 would be better IMO.

That is very true. And from many experiences, my first reaction is to hit the brakes (even if I'm already driving slow), and without thinking the second reaction is to shut that darned thing up...often I'm quicker at the power button than the disarm; but either way without thinking I've slowed down and turned off any jamming before I'm close to them.

As for new manufacturers, and this applies to ANY gadget: make the defaults for the lowest-common-denominator user but allow everything to be tweaked through programming options for the smart ones. Allow us to choose how many seconds to auto-disable, and if we want to manually disarm as well.

..that's one of the issues I have with my 904. There is no programming mode that I know of. Not that there's much to set, but for one I suspect there is a way to make it auto-power-on. It's mentioned in the manual, but it doesn't do it.

TSi+WRX
04-06-2007, 08:40 AM
As for new manufacturers, and this applies to ANY gadget: make the defaults for the lowest-common-denominator user but allow everything to be tweaked through programming options for the smart ones. Allow us to choose how many seconds to auto-disable, and if we want to manually disarm as well.

Well said.