PDA

View Full Version : W T F



marlinspike
02-22-2005, 11:50 AM
Is there a way to check if I got the old darker VEIL or something? My initial results are pretty bad. It seemed fine, dark but still fine, on the lights until it started drying, ot made the license plate a very dark gray and streaky so I stripped that. On the chrome I was able to get rid of streaks by using the sponge instead of the brush (speaking of which I found the brush to be very streaky), but it still made the chrome a very dark gray. I was putting on a very thin coat but still everything got very dark. The only thing I left it on was the lights and if tomorrow I see it's dried how it looks now I'm stripping it off now. MaybeI'm doing something wrong, but even if I am, with as thin a coat as I was putting on I don't see why it should be so dark.
Richard

SETITOFF
02-22-2005, 12:17 PM
Rich, maybe you should let it set and see what the affect is on your lights at night when you have them on. It may be that it's only making your lights look darker but having no relative affect on the lighting.

marlinspike
02-22-2005, 12:22 PM
Well, while what you say might be true, the amount darker it makes them look makes the car look bad. It looks like one of those ricer smoked light kits for tail lights, especially the turn signals and my fog lights (selective yellow fog lights). Even if my lighting is unaffected, if it stays this dark I'm going to strip it and just take my chances with laser until I can afford a blinder.
Richard

marlinspike
02-22-2005, 12:23 PM
Not to mention that if I only have it on my headlights, I'll still get picked up on the chrome and license plate so there's no point.
Richard

sethy
02-22-2005, 12:43 PM
Is there a way to check if I got the old darker VEIL or something? My initial results are pretty bad. It seemed fine, dark but still fine, on the lights until it started drying, ot made the license plate a very dark gray and streaky so I stripped that. On the chrome I was able to get rid of streaks by using the sponge instead of the brush (speaking of which I found the brush to be very streaky), but it still made the chrome a very dark gray. I was putting on a very thin coat but still everything got very dark. The only thing I left it on was the lights and if tomorrow I see it's dried how it looks now I'm stripping it off now. MaybeI'm doing something wrong, but even if I am, with as thin a coat as I was putting on I don't see why it should be so dark.
Richard

They recommend you getting a license plate cover and coating both sides of that, then sticking that on your license plate.

marlinspike
02-22-2005, 12:48 PM
Yeah, but as a MD resident that's not an option for me.
Richard

SETITOFF
02-22-2005, 12:48 PM
the amount darker it makes them look makes the car look bad. It looks like one of those ricer smoked light kits for tail lights, especially the turn signals and my fog lights

I see your point on the looks. As far as the chrome goes, I probably wouldn't apply any there myself, but that's me and how I would want my car to look as well.

Did it seem to dry and set very fast?

marlinspike
02-22-2005, 12:49 PM
It seemed to dry enough very fast, but it wasn't totally set. It also seemed to go through stages of drying. First milky, then smoked, then smokey and milky, and by the time I left (about an hour) it was very dark.
Richard

Radar Roy
02-22-2005, 02:29 PM
If you got it from us, it was the new version

I'm sure that BOB will answer your concerns here shortly

marlinspike
02-22-2005, 03:00 PM
Yah, I got it from you. So I guess maybe I'm just doing something wrong I dunno. I know I'm comign across as a VEIL basher probably, but I was just so pysched about it and then when I used it, especially on the license plate, I was so let down and frustrated, and then it added to my frustration when I shook it with the cap loose and got it all over me (I still have like 75% left though so no big...just hasn't been my day in a lot of areas, and this added to that).
Richard

Veil Guy
02-22-2005, 03:47 PM
marlinspike,

Something appears up. First off VEIL should never appear milky at any point of its application and/or drying so I have some concerns about what is going on.

I didn't take your comments in the slightest as "bashing" so no problem there - let's figure it out together as I trust we can get it right.

First off, I would recommend that when you first shake the Veil material, lt stand about 3 minutes before applying it.

Second, make sure your substrate (ie; the lense) is absosutely dry before applying the marterial.

Third, things can get a little funky if the temperature gets around 50F or lower, as it tends to affect the drying process.

Fourth, make sure the lense is completely cleaned. You may want to prep the lense with rubbing alcohol - if there is any film residue on the surface.

Fifth, in all this time, I had one other owner of an Aston Martin have a similar coating problem on the headlights of his DB7 and one with an aftermarket Mustang light kit which I attributed to a silicone (very slippery_ film as the other vehicles they owned presented no problems for either of them.

The fact that your experiencing VEIL to be too dark even if you are attempting to coat the vehicle with a thin layer tells me something funny is going on.

Give me a ring at my office and let's try to work out on the phone.

I really want your experience with VEIL to be entirely positive so I won't leave you hanging...

877.GET.VEIL

The Veil Guy 8)

marlinspike
02-22-2005, 04:39 PM
While waiting I tried again, this time using an even thinner coat (instead of putting the brush in the container I got the paint off of the inside of the cap). It worked for the headlights, but I still can't get a smooth coat on the chrome (the closest I got was trying to put a ton on at once and letting it sheet down, but that was obviously too dark, and it still streaked from the initial sponging). Also, the plate still gets really really dark and it streaks too. With the plate I wonder if perhaps 20 years of driving wore off some topl layer it's suppoed to have or something? The temp was in the 60's so I don't think that's the problem. As far as calling you...I'll try at some point tomorrow. No way I'll have the time today cause I gotta run in a couple minutes and then I'm booked for the night.
Richard

marlinspike
02-22-2005, 04:49 PM
I should add, I can get it to work on the thin bits of chrome, it's on the wide part that I get trouble...perhaps the brush/sponge is the issue? Still doesn't explain the license plate though. Also, I'm worried the amount I put on my headlights isn't enough to do anything since if I used that thin a layer everywhere I'd probably get like 20 applications out of a jar, not 5.
Richard

brick
02-22-2005, 05:08 PM
VeilGuy-

These coating problems that folks seem to have sound very similar to what happens to me ANY TIME I try to paint something delicate by hand. I suspect that the imperfections are really no greater than with anything else but they show up more with Veil due to it's makeup. (I've never seen it in person but I suspect that it's a mixture, not a solution.) So...what do you think about offering your product in a spray can? For regular paint a spray always works better for me as long as I mask everything very well. Also, I've been using a Rustoleum "chalkboard paint" in place of normal flat black and it's quite thick, leading me to believe that it might be a real possibility for Veil.

That's just my suggestion, so feel free to take it or leave it as you will.

Veil Guy
02-22-2005, 05:13 PM
Don't worry about the number.

We tend to be conservative with our statements. Depending on the vehicle, you could get well more than that. 5-6 was very safe. Just like saying 6-9.

On my personal vehicle I am currently at 9 months and the coating is still going strong!

Again, my philosophy is under-promise and over-deliver.

Roy has some great pics that he sent me a while ago of his bike treated with Veil.

I'll find a way to post them. Additionally I have some video of application and removal that I need to recompress so its viewable online.

I have just been totally pre-oocupied with conducting this review so I will get to all of this when the dust settles a bit.

I wouldn't get to hung up on the chrome. Veil has done extremely well even on vehicles that have not had their chrome treated and I consider it like fourth/fifth in importance anyway. As long as your lights are better thats an important thing. The plate is also very important so we should work out a way to get the job done here, as well.

So, lets talk when you get the chance.

Bob (aka The Veil Guy) 8)

marlinspike
02-22-2005, 05:27 PM
Just stopping in for a sec and going back out to do more work (they keep us busy here...especially the week before a vacation). Anyways, here's a pic of the grill. I think it's substantial enough to worry about, but I could be wrong

http://www.germanstar.net/Pics/1268800883.jpg
and for some perspective
http://www.mbpartsonline.com/pics/126.jpg

Yeah, I know the pics are tiny. They're the best I could find online. I keep forgetting to take pics of mine.
The part that's giving me trouble is the wide band at the top.
Richard

marlinspike
02-22-2005, 05:36 PM
Except for a different light treatment and a different color (mine's the color of the one in the second of the tiny pics..which was a lot larger on the site I lifted it from), that's how mine looks (well different wheels too). And the SEL is only 6 inches longer, not THAT much.
Richard

brick
02-22-2005, 05:38 PM
I'll take mine in black, please :D .

I love older cars like that. Less plastic, more character.

marlinspike
02-22-2005, 07:14 PM
I'll take mine in black, please :D .

I love older cars like that. Less plastic, more character.

Good luck. 040 black was one of the more rare colors (but doesn't get any more money than any other color). And if you want the coupe...well then you need more than luck. Midnight blue (which was almost black) is readily available though. Mine's got even less plastic than that one (in 1986 they changed them a little bit, different engine block, added a passenger air bag at the expense of a glovebox, made the engine sound more muffled, made the steering looser, put it a hydraulic suspension, added those headlight wipers, but most important to me in 1986 they took away the glorious 80's euro-coolness nets behind the from seats and replaced them with boring leather pockets).
Richard

marlinspike
02-23-2005, 12:41 PM
Ok, as reluctant as I am o show a picture of my car when it needs a wash and wax, here are some pictures to get an idea of whats what.
This is the car
http://davidson.smugmug.com/photos/16383301-L.jpg

This is what I'm talking about with the plate. I know it looks like a monkey applied the VEIL. What happened is I forgot my paper towels so I just basically tried a bunch of different kinds of strokes and thicknesses, and then at the end I tried mashing them all together too. As you can see it didn't really work, but this is the amount of streaking I'm talking about anyways (ok, this is a little worse than normal, but this is very close). Hmmm...I wonder...maybe a small roller would work?
http://davidson.smugmug.com/photos/16383303-O.jpg

marlinspike
02-23-2005, 12:49 PM
Oh, and nobody stole my star...well they did a while ago, so now I use a removeable one.

Veil Guy
02-23-2005, 01:21 PM
marlinspike,

Plate doesn't look's way too streaky it should appear pretty smooth.

I may prep one and show how it should look.

First off, I would recommend that you take the plate off the car and apply Veil to it indoors.

Second, I would recommend that you place the plate at a slight inclined angle in a bathroom sink as it will hold the plate well.

Third, as we discussed on the phone - try letting VEIL settle for about 3-5 minutes after shaking the material.

The plate should not appear streaky at all just somewhat darker in appearance and low in gloss.

I'll be standing by to see how things go.

The Veil Guy

marlinspike
02-23-2005, 01:25 PM
I did try the letting it sit trick. One of the lights (the one on the right...our right, not the car's) was fine but the one on the left was too thin so I stripped it and redid it this time letting it sit. That did work better on the light, but still streaked on the plate. I'll try taking it off the car and reapplying later today.
Richard

marlinspike
02-23-2005, 01:26 PM
Oh, and do you think it might be worthwhile to buy a small roller?
Richard

marlinspike
02-23-2005, 05:37 PM
Ok, well getting better. In the sink combined with letting it sit 4 minutes after shaking helped a lot with the streaking...though like an true idiot I touched up a partially dry area and streaked it...D'oh. I think I'll leave it like this for now, and then when I go home strip it and reapply this time with a small paint roller. This stuff dries pretty fast considering it has a 24 hour cure time. It has made my plate pretty dark, at least under these dorm lights. I'll see how it is outdoors the day after tomorrow (it's going to rain tomorrow). Interestingly enough, or maybe it's obvious, after stripping the old VEIL it appeared a very bright pink/purple under my dorm room flourescents, and it still has a purple background color to it after the VEIL. I think it's cause of these flourescent lights though. They are like 3500K.
Richard

Veil Guy
02-23-2005, 07:16 PM
I am glad to hear that things have improved over what you had earlier.

Even though it dries relatively quickly its strongly recommended that the film be allowed to dry for a good 24 hours before being exposed to moisture so that it can form a weather-resistent coating.

The brush should be more than up to the task. Give it a try and let me know how it turns out.

The Veil Guy 8)

marlinspike
02-23-2005, 07:19 PM
The brush was up to the task, but with all the ridges in the plate it would miss spots and then I would have to go back over those spots, by which point the paint had dried it enough to streak when I went back over it, which is why I'm thinking roller since the roller will squeeze on the ridges and maybe not miss the spots, and even if it doesn I can quickly go back over it. Still looks dark, but it should be fine...though did you see my post about an alternate MD plate? I'm thinking that plate would look better, and this 20 year old plate of mine is all cracked up anyways.
Richard

Veil Guy
02-23-2005, 07:30 PM
brick,

Thanks for your suggestion. We did gave it some consideration, but a couple of things gave us pause:

1) Transportation can be a problem with pressurized containers.
2) Areas that are to be treated would absolutely require masking off to prevent overspray.

With a brush/foam application, we found greater flexibility in most cases.

But your are essentially correct, it acts like a paint. Coating glass and plastic is not particularly easy to do.

Veil will continue to evolve, over time, and as we get more experience from all the varied uses, we can work on areas that will improve the [ease of use of the] product.

The Veil Guy 8)

brick
02-23-2005, 08:17 PM
Veil Guy

No problem. It sounds to me like you have an excellent product and are doing a very good job developing it. I think it's just the ticket (no pun intended) for jammer-averse people like me. I'm looking forward to giving Veil a shot once the weather warms up enough to apply it.

happya$$
02-23-2005, 08:18 PM
Brick you will not be sorry

Veil Guy
02-23-2005, 08:37 PM
brick,

thank you for those supportive comments. they are much appreciated.

we're trying. it's taken us an incredible amount of time, money, resources just to get to this point.

it may have some "minor warts" but we're always working on improving it.

again thanks and good luck with it when you do.

i can't wait for spring although this february was about the warmest we have had in a very long time!

the veil guy 8)