Opinions.... Stealth or Auto-dimming?

[ukchris]

Just been working on this and wanted to get some input, in particular what is more important in a mirror, a stealth install or auto-dimming? My dilema is that I can do one or the other but not both as the glass has to be swapped to get the 100% disappearing display (vanishes completely when the V1 is off).

YouTube - Valentine V1 Display Mounted Behind Two-way Mirror

Chris.

[CJR238]

Most new cars have a small display like that in there mirrors, even the same color. So no one will be the wiser.

[ukchris]

Most new cars have a small display like that in there mirrors, even the same color. So no one will be the wiser.

Most of the ones I have worked with that have a compass or thermometer display have it in a cutout, there seem to be bery few that show through the mirror however I agree, it wouldn't look obvious the way it is presented in the video. The limitation however is that to make that mirror I had to replace the glass so now it has the hidden display but is no longer auto dimming.

[CJR238]

Most new cars have a small display like that in there mirrors, even the same color. So no one will be the wiser.

Most of the ones I have worked with that have a compass or thermometer display have it in a cutout, there seem to be bery few that show through the mirror however I agree, it wouldn't look obvious the way it is presented in the video. The limitation however is that to make that mirror I had to replace the glass so now it has the hidden display but is no longer auto dimming.

Can you leave where the light sensor is clear on the mirror so it will work?

[ukchris]

Can you leave where the light sensor is clear on the mirror so it will work?

The glass is two-way so light still gets through to the brightness sensor, I am still testing materials particularly with regard to what impacts the brightness the most. I can force the display to always be at the maximum brightness but that is then too much at night.

This mirror is a generic Gentex one, I am also testing a Lamborghini glass for which I used a different process and I think it was brighter although this one is still quite readable. I took a drive with it in bright sunshine today and could still see it clearly.

[ukchris]

If you're interested in doing some testing I might make up a prototype that has the V1 and 9500ci displays in it.

[CJR238]

Let us know how it works out. I wont be running my V1 and 9500ci, but could this be done with a Redline and 9500ci?

[ukchris]

Let us know how it works out. I wont be running my V1 and 9500ci, but could this be done with a Redline and 9500ci?

9500ci for sure, does the Redline have a deparate display?

[CJR238]

Let us know how it works out. I wont be running my V1 and 9500ci, but could this be done with a Redline and 9500ci?

9500ci for sure, does the Redline have a deparate display?

Its built in to the unit, guess it cant be done. :(

[ukchris]

Let us know how it works out. I wont be running my V1 and 9500ci, but could this be done with a Redline and 9500ci?

9500ci for sure, does the Redline have a deparate display?

Its built in to the unit, guess it cant be done. :(

Afraid so... unless it can be extended and I very much doubt that.

[KOMO]

Let us know how it works out. I wont be running my V1 and 9500ci, but could this be done with a Redline and 9500ci?

9500ci for sure, does the Redline have a deparate display?

I wanted to do something similar like this for my 9500ix but there are no concealed display options. Instead I opted to run an alert LED that could theoretically be put into a mirror like this.

[crod]

just a question. where are you mounting the detector?

[ukchris]

Let us know how it works out. I wont be running my V1 and 9500ci, but could this be done with a Redline and 9500ci?

9500ci for sure, does the Redline have a deparate display?

I wanted to do something similar like this for my 9500ix but there are no concealed display options. Instead I opted to run an alert LED that could theoretically be put into a mirror like this.

Does the ix support an LED liek this or did you have to wire it up yourself? I've done single LEDs for Blinder and Laser Park Pro.

[ukchris]

just a question. where are you mounting the detector?

This is a prototype at the moment, this will ultimately go in a car that will probably have the V1 mounted either up front inthe headliner or in the rear on a custom bracket and disguised in an acrylic case.