PDA

View Full Version : laser error codes and easy to remove jammers!



laserblaster
04-15-2005, 11:09 AM
i'm concidering getting a laser jammer sice the camera partnerships have started to target the motorways!!

i know what some laser guns have jammer indicators and some laser jammers dont set the indicator off!

but when the laser jammer jams the gun gives off an error code

E01 E02 E03 E04!!

I know that E02 can be caused by a jammer but it can also be caused by interuption to the beam!

whats this E04!

if i get a jammer i want it to give off an error code which will make the operator think its just out of range etc!

if ive got the jammer on and i see the van before they laser me i will slow down if i'm over the limit... and knock the jammer off if it doesnt alert or jam before i knock it off i will think nothing of it!!

i will also knock the jammer off so that they can get a speed reading!
which will be under the limit!!

also if i get lasered..... and obviously it will jam i will do the above but i will remove the jammer when i'm home!!

are there any jammers which just disconect from the loom!

basicly like disconecting your radar detector!!

are there any jammers which just pul out without taking all the wiring loom with them!!

Radar Roy
04-15-2005, 11:34 AM
I have seen E4 error codes with Shifer ZR3 jammers, not with the Blinder jammers

laserblaster
04-15-2005, 01:48 PM
cheers roy...

i could do with knowing what all the error codes mean......

jammer test do you know what all the error codes mean?

jammers are illegal over here in the uk well only using them at the moment is and i'm wonering what error codes jammers give off!

and are their any jammers that are easy to remove.... and put back in!

probibly bullit connect them so they are easy to remove in the event the cops come around!!

they have put the vans on the M4 trip speed is 79mph!! on a motorway!

this is why i'm now very very tempted to get a jammer!!

JTW
04-15-2005, 02:35 PM
Error codes are defined in the manuals. Officers should know what each error code represents because they run into them all the time. LTI 20/20's are very sensitive and have great error trapping, which is why they always show error codes.

Chris

crazyVOLVOrob
04-15-2005, 02:43 PM
Error codes are defined in the manuals. Officers should know what each error code represents because they run into them all the time. LTI 20/20's are very sensitive and have great error trapping, which is why they always show error codes.

ChrisIs that why the LTI 20/20 markman is hardly in use now?

JTW
04-15-2005, 02:49 PM
You don't see the Marksman anymore because LTI stopped making them. They were replaced by the LTI 20/20 100LR, 100, LR B, 200, 200LR, and LTI compact.

Chris

andy
04-23-2005, 05:47 PM
im using the m20x on one vehicle but you couldnt remove them very quickly and ive just got hold of 2 target lt450's.thats the lt400 laser remote(jammer)and the home pick-up/switching unit to operate security lights or garage door opener on arrival.the lt 400 unit is a nice size single unit but my main point is that the loom from it is terminated with a plug a few feet down that then plugs into another loom plug that then goes to the interior.so if you had the sensor mounted and wired up but needed to remove the obvious bit before the police inspection- its unit off its mounting bracket (or heavy duty velcro)and unplug the lead in the engine bay from its connection plug and no jammer,2-3 minutes tops :D

laserblaster
04-24-2005, 06:25 PM
that sounds great.... that might be just the thing! :o