Results 1 to 8 of 8
  1. #1
    Speed Demon
    Join Date
    Mar 2005
    Posts
    597

    Default RX65 users New Threat Display : tracks multiple radar signal

    I seach google and cant find a picture. What does the display look like? Does it come up and say 2 ka signals detected or what?

  2. #2
    Power User
    Join Date
    Feb 2005
    Location
    In Car RamRod
    Posts
    4,001

    Default

    id say if it tracks 2 KA signals it will just show the stronger one... lets say its getting a 3KA and a 1 KA it will show 3KA on the display....

  3. #3
    Good Citizen
    Join Date
    May 2005
    Location
    El Paso
    Posts
    177

    Default Manual

    I'll PM you a url that will get you a PDF of the manual. Page 11 will show you what the display looks like.

    Basically, it only shows one of each band.

  4. #4
    Speed Demon
    Join Date
    Mar 2005
    Posts
    597

    Default

    thanks guys! More or less a bogey counter like the V1 has.

  5. #5
    Experienced
    Join Date
    Jun 2005
    Location
    Budapest, HU
    Posts
    255

    Default

    Quote Originally Posted by raresvx
    thanks guys! More or less a bogey counter like the V1 has.
    IMHO the bogey counter is something else. You can see on RX-65 how strong is each source, for example if there is a door-opener on K band behind you and a police car with Ka band in front of you then RX-65's display will show K2 Ka5, numbers are depend how strong is each source at your position.
    At the same situation the V1 will show a number on its bogey counter (it depends the number of sources, in this case at least 2), K band LED and down arrow are on, Ka LED and up arrow are flashing (because Ka signal is stronger) and bottom LEDs are showing the strength of signal.

  6. #6
    Yoda of Radar
    Join Date
    Mar 2005
    Location
    Rottweiler Land
    Posts
    10,420

    Default

    See that's one reason I am selling my RX 65. It will ONLY tell you multiple signals of different types (1K and 1 KA for example) when I pass the local Kroger it would be nice to know if the local police were sitting there again as they usually do. I know people say check the signal strengh but if I had a V1 it would show me 2 K. :roll:

  7. #7
    Professional
    Join Date
    Nov 2004
    Posts
    1,397

    Default

    If multiple threat tracking is important to you, the Escort X50 cannot be beat. It tracks MULTIPLE KA sources at the SAME time, not just the single on like the RX65.

  8. #8
    Lead Foot
    Join Date
    Jan 2005
    Posts
    403

    Default

    My observation is that with auto-mute enabled on the RX65 I get a new alert when detecting multiple bogeys. For example, there is a spot in my city with two stores having k-band door openers pretty close to each . I pick up the first signal and the detector alerts then auto-mutes. When it detects the second k-band signal it unmutes and gives a new full alert.

    With the RX65, I have been able to pick up an actual cop shooting K-band just past a grocery store with a K-band door opener. He was shooting instant on. Periodically when I approached the numerical signal strength on K-band would increase beyond normal (1-2) and the detector would come out of auto-mute letting me know something else was there too. I must say that whenever I use my detector it is always on highway mode even in the city. I find that when in places with a lot of falses I tend not to speed anyway because it is usually not safe to do so.

 

 

Similar Threads

  1. Threat Display feature with the RX65.
    By satman858 in forum Beltronics
    Replies: 3
    Last Post: 03-13-2012, 07:07 AM
  2. rx65 threat display
    By richardboy316 in forum Beltronics
    Replies: 33
    Last Post: 10-13-2006, 11:33 AM
  3. RX65 K Alert "distorted" in display threat mode
    By lowdtunz in forum Beltronics
    Replies: 4
    Last Post: 01-01-2006, 04:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •