LED jammer with billet grille

[againstme!]

where to place LED jammer head with the grille...there is no room.

http://flickr.com/photos/brandonquintel/120906129/

[againstme!]

can i place the heads behind the grille and have the slit with the LEDs looking out the slats of the grille?

[Arashi666]

I dunno about the grill but the only place I see that wont require some cutting is those two air dams next to your plate but that would KILL it

[againstme!]

right, im gonna place 2 in those air slots and 2 in grille.

[Arashi666]

and that other idea, you can probably do it, but you might not get the best possible jamming

[Arashi666]

really thats the problem with LED jammers, theyre so big

[againstme!]

and that other idea, you can probably do it, but you might not get the best possible jamming

well ive been told by a few "laser experts" on the board and they think 2 in grille and 2 in those air holes is perfect

[Arashi666]

and that other idea, you can probably do it, but you might not get the best possible jamming

well ive been told by a few "laser experts" on the board and they think 2 in grille and 2 in those air holes is perfect

that should be fine then, im not really an Expert as you mention, im just knowledgeable, but yeah, as long as the LEDs have a CLEAR line of sight it should be fine, since the "Laser" beam is pretty thin at the point of origin

[againstme!]

so you think if the heads are behind the grille looking out through the slats as much as possible, it should be ok?

[Arashi666]

so you think if the heads are behind the grille looking out through the slats as much as possible, it should be ok?

the way I see it, is that as long as the LEDs have a clear view of the road ahead you should be fine, really you just need to find a good place to mount them so that they dont fall out of 'aim'

Remember with LED jammers LEVEL placement is a MUST



YAY this is my 666th post!!!!