Printable View
I'M sure this has been spoke of before, but I can't find the thread to it.
This particular question is soley baised on the LTI laser gun.
If a leo is targeting a vehicle, once he gets a speed/distance reading does the laser stop? Does he have to retrigger the gun to get an additional reading?
Or can he keep holding down the trigger and hit other cars without retriggering?
Once the laser gun gets a speed, you need to let go of the trigger and hit it again - else the speed will continue to flash on the screen/ along with the distance.
Arent you describing a panning error situation? I think Suf Daddy demo's this in one of his videos.
So, it would be safe to say if the Radar Detector and Jammer are going off without stopping, it would be safe to say the gun has not obtained a reading yet?
Unless they are being hit with a gun that has a continuous tracking mode, likt the Stalker LZ-1...Quote:
Originally Posted by StlouisX50
LTI guns (except the Marksman and 20/20) have the continuous tracking mode to like the stalker. Although it is not selected by default.
Is there a place that I can look at the LTI guns, from A-Z and see which one is which? I have seen the photo of all the lidar guns in a group but none of them showed numorous LTI guns, just 1 or 2 of them.
Well, most Ultralytes look the same except for the UL Compact. There are the LR versions with more power, and the 200 versions with the inclimometer, but they look the same except for the model name.Quote:
Originally Posted by StlouisX50
Then there's the 20/20 and Marksman which look similar to each other.
Try here:
http://www.guysoflidar.com/laser-guns.html
Or here (Recently updated!):
http://www.lasertech.com/Speed_Enfor.../Hand-held.htm
Look in the Real Experiances Section for the reason I asked these questions.