Printable View
I was wondering if you guys could give me some feedback on the install. I let the installer put it as far out as they liked, since I rather have actual performance than stealth. So I posted some pics, if you could give me some feedback that would be great! The guy mounted it with double sided tape using silicon, he said it would hold.
IMG 0380
IMG 0381
thanks!
i think i like this better http://img4.pictiger.com/22f/16655979.jpg?u=1220486179
is it just me or is your passenger side head pointing toward the sky almost?
also the bubbles should toward the outside of your car (you have the heads flipped the wrong way)
I would move them further outboard to that slot under the light if possible and then rotate the sensors so that the bubbles are outboard as well. Since youre not running a front plate, I would get those sensors as close to the headlights as possible.
Agreed. If they'll fit in those outboard slots, that would be better. But if not, I think you'll do just fine with them in the current locations, so long as you flip the bubbles out.
Those new generation wrap around headlights are going to be your achilles heel. I'd go with a layer of Veil on them to give you an extra measure of protection against the common off-axis shot. It'll look good on that black car.
well thas good to know. it turns out my sensors are defective since they keep alerting to Tarffic XT, but Cliff is going to replace them. so I can tell the installers to fix it. and no they aren't pointing up lol. thanks everyone!
Do you mean Traffipatrol XR? That's the alert commonly heard when you have an Infinity coming at you.Quote:
Originally Posted by DarkChewby
Yes, I agree. Get those heads closer to the headlights and the one on the right needs to be leveled out.
make sure you dont have an infinity close to you when it happens...Quote:
Originally Posted by DarkChewby
Minimumly move the bubbles to be on the outside.
If possible move the heads to the outer slots
x2 bubbles out