CJR238's 9500ci finally installed....

Just finished my 9500ci install. http://escortradarforum.com/forums/i...es/biggrin.gif

I'm still going to do some tweaking but it looks pretty darn good...

Rear shifter. would block the plate lights so i installed it lower for now.

http://img15.imageshack.us/img15/9339/cimg3140m.jpg

I was able to fit both jammers in the front and the radar antenna as well.
http://img15.imageshack.us/img15/2595/cimg3127a.jpg

The control pad is installed by the heated seat switches. I was surprised how small it was, but disappointed there was no GPS on/off button.
http://img685.imageshack.us/img685/3090/cimg3132.jpg

The display fit perfect by my clock.
http://img12.imageshack.us/img12/4795/cimg3130f.jpg

http://img651.imageshack.us/img651/8896/cimg3134.jpg

http://img20.imageshack.us/img20/7190/cimg3133j.jpg

http://www.thebbps.com/blog/wp-conte...ters-71133.jpg

:p 9500ci radar antenna is upside down.

I can't really tell from the pic but it looks like your laser shifters are toed out to the sides a little. Interior install looks great :thumb2:

Quote:

---

Originally Posted by snoopyc4

:p 9500ci radar antenna is upside down.

I can't really tell from the pic but it looks like your laser shifters are toed out to the sides a little. Interior install looks great :thumb2:

---

lol, hers a close pic. Installer had some issues, will be doing some odds and ends. antenna needs to be pushed back too.

http://img685.imageshack.us/img685/5053/cimg3138h.jpg

Quote:

---

Originally Posted by CJR238

Quote:

---

Originally Posted by snoopyc4

:p 9500ci radar antenna is upside down.

I can't really tell from the pic but it looks like your laser shifters are toed out to the sides a little. Interior install looks great :thumb2:

---

lol, hers a close pic.

http://img685.imageshack.us/img685/5053/cimg3138h.jpg

---

:p Upside down. Look at this video at 1:14:

[ame=http://www.youtube.com/watch?v=OEdScC30d8M]YouTube - Escort 9500ci 9500ix V1 Laser Interceptor Veil G4 Walkaround[/ame]

Ya totally... fixed, still working on pushing it back.

I even made MEM-TEK's cut outs for the installer, lol.

At least he did all the hard stuff. Just finished some more adjustments and made the switches/display permanent.

Nice install, I thought about putting my antenna there, but mounted it in the lower grill. I have noticed no difference between my install in my last car though so I don't think I'm going to move it up. Let us know how it performs and see how happy you are with it. I know you will be very pleased. It is a big step up from the 9500 and 8500.

Quote:

---

Originally Posted by Woodscolby

Nice install, I thought about putting my antenna there, but mounted it in the lower grill. I have noticed no difference between my install in my last car though so I don't think I'm going to move it up. Let us know how it performs and see how happy you are with it. I know you will be very pleased. It is a big step up from the 9500 and 8500.

---

I wanted it as high as possible so that was the only other option really. However its a real pain because the radiator bracket among other things were in the way so it sticks out from the inner grill more than i would like.

Had a few alerts 5 seconds before my 9500ix even alerted.

Nice Install

Shifter heads are too close to each other! You should have them mounted in the upper slot and the Radar head in the lower slot

Quote:

---

Originally Posted by crazyVOLVOrob

Shifter heads are too close to each other! You should have them mounted in the upper slot and the Radar head in the lower slot

---

Polled that one already, and the verdict was where they are now. Only a few inches difference from the upper slot anyway. Besides they don't jamm that well , right?

I should have pretty good center mass from plate to top of grill well covered . If i need more ill get a set of LI's.