1 Attachment(s)
Hello all!! need some help please
hello all im new here..
i have a passport 9500ci and im moving it from my 2014 jeep grand cherokee to my 2015 GMC Yukon and need help in cleanest and best place to install the laser shifters, any advise on it guys? greatly appreciated
Attachment 6633
thanks guys
Re: Hello all!! need some help please
Quote:
Originally Posted by
joeruby
hello all im new here..
i have a passport 9500ci and im moving it from my 2014 jeep grand cherokee to my 2015 GMC Yukon and need help in cleanest and best place to install the laser shifters, any advise on it guys? greatly appreciated
Attachment 6633
thanks guys
If there is sufficient space below the main headlights, that would be my first choice. Otherwise perhaps on the second or third tier of the main grill to the extreme left and right. If the head placement is tough, I am going to recommend Veil to take care of the headlights and foglights. When used in that manner, the placement of the heads are going to be less critical as they have less work to do. Those headlights are the tough ones to protect from laser.
Also, make sure your heads are dead level. Tests have shown that when they are off, even a little bit, their effectiveness drops, sometimes, dramatically so.
I'll be interested to see what other opinions are from others.
Good luck. One other thing, with the new lasers out there, the older ci and the ZR4s are less effective. If you are going to go through the trouble you may want to consider updating them to the Laser Shifter Pros. ALP appears to be the best thing going at the moment. The LIs and Blinders don't appear to be as full-proof.
VG
Re: Hello all!! need some help please
thanks alot for your advise, im not too experienced with this, my question is, how about mounting them under the front bumper sticking out a little bit? inthe grill is tough since ill need to cut into the grill and ill need to replace the grill upon lease end?
Re: Hello all!! need some help please
Cut out an 18" circle and use the center as where the head could be placed for best coverage of both fog and main HL. You want the circle to overlap both lights for best results. If it won't then cover the main and what ever part of fogs and veil for the help with your system. The circle represents coverage from head.
Re: Hello all!! need some help please
Going down low on the bumper could be a challenge for the jammers to cover the headlight reflections.
Brownout's suggestion sounds pretty solid to me.
VG
Re: Hello all!! need some help please
I have a video here on installing a laser jammer you may find helpful: How to Install and Use Your Laser Jammer
Also I agree with Bob, the ZR4 is somewhat dated, if you're going through all the steps to put a jammer on you may want to consider getting a new one.
Drive safe and smart...
Re: Hello all!! need some help please
Quote:
Originally Posted by
joeruby
hello all im new here..
i have a passport 9500ci and im moving it from my 2014 jeep grand cherokee to my 2015 GMC Yukon and need help in cleanest and best place to install the laser shifters, any advise on it guys? greatly appreciated.
thanks guys
Before you do the install,can you tells us what Country part or State you drive in most ? The 9500ci may not be sufficient for your location.