LED jammer with billet grille

where to place LED jammer head with the grille...there is no room.

http://flickr.com/photos/brandonquintel/120906129/

can i place the heads behind the grille and have the slit with the LEDs looking out the slats of the grille?

I dunno about the grill but the only place I see that wont require some cutting is those two air dams next to your plate but that would KILL it

right, im gonna place 2 in those air slots and 2 in grille.

and that other idea, you can probably do it, but you might not get the best possible jamming

really thats the problem with LED jammers, theyre so big

Quote:

---

Originally Posted by Arashi666

and that other idea, you can probably do it, but you might not get the best possible jamming

---

well ive been told by a few "laser experts" on the board and they think 2 in grille and 2 in those air holes is perfect

Quote:

---

Originally Posted by againstme!

Quote:

---

Originally Posted by Arashi666

and that other idea, you can probably do it, but you might not get the best possible jamming

---

well ive been told by a few "laser experts" on the board and they think 2 in grille and 2 in those air holes is perfect

---

that should be fine then, im not really an Expert as you mention, im just knowledgeable, but yeah, as long as the LEDs have a CLEAR line of sight it should be fine, since the "Laser" beam is pretty thin at the point of origin

so you think if the heads are behind the grille looking out through the slats as much as possible, it should be ok?

Quote:

---

Originally Posted by againstme!

so you think if the heads are behind the grille looking out through the slats as much as possible, it should be ok?

---

the way I see it, is that as long as the LEDs have a clear view of the road ahead you should be fine, really you just need to find a good place to mount them so that they dont fall out of 'aim'

Remember with LED jammers LEVEL placement is a MUST



YAY this is my 666th post!!!!

right. well i might bend the grille bars slightly to make room for the heads.

Quote:

---

Originally Posted by againstme!

right. well i might bend the grille bars slightly to make room for the heads.

---

whatever works for you man

heres something you might not have thought about. look around on the net for replacement grill inserts. i have a dodge hemi pickup that came with a honeycomb type insert and after searching i found a replacement that was similar to yours but with wider spacing. the openings measured about 1.5" high and 6" wide. i think it cost me about 70 bucks. the original grill was black and all i could find was chrome so i sandblasted it and sprayed it with a flat black to match the stock grill and it looks and works perfectly with my zr3. do a search and you may be surprised what you can find for your chevy.

thanks for the reply. i have thought about it, but dont want to/cant afford a new grille. :(