Do you use the Expert Meter mode on your Passport RD? Why or why not?
Printable View
Do you use the Expert Meter mode on your Passport RD? Why or why not?
I use the Expert Meter all the time.
Today, I was approaching a Wal-greens and got strong dual K alerts that probably would have over powered the weak Ka that was coming from an approaching LEO.
I use it because I run a V1 on Ka band and it has Bogey counter and my 9500ix I only run K band and use expert so its like have 2 Bogey counters.
I'd run it more if it was combined with spec mode. Spec mode allows me to more quickly identify a false alarm on K or Ka (especially).
I use it more around town if I'm using the X50. If I get a C/O Ka alert, I'll switch it to spec mode just to see what it is. On the highway, its spec mode.
I use it because i get goosebumps every time i here "Multiple Frequencies Detected":Banane42:
I'm a numbers guy. For some reason, my brain needs to see the frequency. Any time I use anything but spec display, I get annoyed.
On Texas interstates Ka 34.747 is death. So yeah, I couldn't live without it.
It also helps me sort out HPD 35.5 from Harris County constables 33.8. I don't think it helps much for K band.
btw: I think this is one of the better polls I've seen here recently.
I stick with Expert Meter on my X50. I prefer being able to track multiple signals visually; and I haven't had much enjoyment with the frequency display or the big-bar-of-blue display.
Well I don't have my 8500 yet, but I think when it arrives, I will start out using it on SpecDisplay for a week or 2, and the Expert Mode for a week or 2 in order to see which one I like better. If I need to I will just switch back and forth.
I switched to expert meter after about 2 weeks with the 9500ix. I got used to it quickly, and now use it 100% of the time. As CJR says... It's fun to hear Multiple Frequencies Detected!!
I like Spec mode better than Expert.
It was my understanding that even a very weak Ka signal will always outrank a strong K band signal on threat mode. That's been my experience anyway.
That said, I find threat mode more convenient than expert mode because I end up muting it a lot for falses when I have passengers. With the bigger bars I can keep an eye on it to make sure I don't come across an actual K band threat right after muting out a walgreens or a speed sign.
Escort's always done Laser > Ka > K > X; and tiebreakers amongst the band categories are broken by the strongest signal strength.
H. . . . . . . . . . .
Spec mode :thumb2:
Personally I'm like DJ, I use Spec Mode exclusively. However, according to the poll results a lot of you like the Expert Meter, so I'm trying to understand how you use it and what features you like about it. So here are some additional questions for you guys:
The 9500ci offers four - count 'em, four - meter bars for X-band in Expert Meter mode, plus 2 bars for K and 2 for Ka.
http://www.escortradar.com/img/expertmeter.gif
Do you find the ability to track up to 4 X-band signals to be genuinely useful? Do you actually look at those teensy-weensy little signal bars? Or do you mostly just look at the band information?
OTOH, the STi-R equivalent to Expert Meter is the "Threat Display" which replaces the little bars with decimal digits 1-9. It seems this would be easier to read at a quick glance. It's not clear from the owner's manual, but it appears that the Threat Display can only track a single source in each band; is that correct? Do you consider the Threat Display less useful than the Expert Meter because of this?
Spec mode works well for me, I look for changing frequencies to determine how many threats I have. I tried expert mode but I cant see that well. Hmm maybe time for glasses.:eek:
I really like Expert meter. The Bogey counter on my V1 is easier to read, but all you know is the total number. If you squint real hard you can tell what bands they are on, but if you've got a 4 on the bogey counter and K and KA blinking you don't know which ones are where. With Expert meter I can tell at a glance which bands have how many signals.
I c an't wait for Escort to put togeather Spec and Expertmeter (Spec mode on a single, automatically switching to Expert Meter on "Multiple Signals detected".
Spec mode is very useful around here. I don't really like expert mode.
when you know which frequency theyre using its pretty helpfull , when i see 35.5 its braking time:p spec mode all the way
I totlly disagree with you. The way the V1 works is, it flashes if K or Ka is the strongest band and you have both visual indicators to alert you with X,K and Ka bands. It also overrides a weak signal with the audio tones unlike the escort, Ka always overrides a K band alert.
The problem with expert mode is, it will not show 2 bogeys with police K band and falls frequency if it is in the 24.150 which is mostly what is used. Same problem with truelock. The truelock and expert mode work side by side - they work with the same technology. So if you have say 2 stalker radar guns being operated, escort will only show 1 bogey and the V1 will show 2 bogeys. That's the difference with V1's bogey counter and escort's expert mode.
I only use spec mode for the same reasons as others have posted.
I personally choose spec mode all the time my fav.I miss my rx65 i used to have wit spec mode.All i got to do is look at the freq and thats that. I feel the old style way wit ka coming up and freq bar goes up is old these days.
I mainly prefer Expert mode because of how it works with Voice Alerting. I already used Spec mode to know what is used where, so its not necessary anymore. Though it would be nice to have both at the same time.
The main advantage with Expert mode and the 9500's is its very obvious when there is an additional threat and it will notify you verbally of "Multiple Frequency’s detected".
1- I will know when there is an additional threat and what band at the same time if its difrent.
2- Better/obvious verbal confirmation.
3- Also knowing what TrueLock is seeing when it comes to how many alerts (frequency is less important due to not knowing what other frequency’s its locking).
My V1 may flash the band that is the biggest threat, but it still doesn't tell you what they are if you have more than 2. Add the ghosting issue and if in the City I find that the V1 is difficult to use for target identification. If you have X, K, and KA all on with K blinking and a total of 5 on the bogey counter what do you do? With Expertmeter I may see 2 X, 1 K and 2 Ka signals which to me means MUCH more than the V1 tells me.
Its certainly much clearer and obvious, but it is doing some of the thinking for you. I prefer it.
I don’t need to know about the 3 ghosts, 2 falses and the one LEO running K but miss the other LEO shooting KA because the K was the strongest signal. I prefer to know about only the LEO’s.
Nether is perfect, but they have there purpose and work well for what they are doing.
What's the cheapest belscort with an expert meter?
The V1 will display up to 10 bogies but will track more which I agree is not very helpful and a pain in the arse at times.
On the other hand a Ka threat is always treated by the V1 as priority, will bogie lock alert tone to alert you to it, flash Ka in the bands meter to alert you to it, and change to audio alert to Ka as it is the priority frequency. If you miss the situational awarness of all the above, you deserve a ticket.
Your Belscort isn't even anywhere near as accurate as the V1 in identifying bogeys, not even close I 100% guarentee it. Most of the time the Belscort is lucky to identify two seperate sources let alone the 5 you use as an example.
I don't know where you live but X band isn't a threat in most areas. You could ratchet up the perceived threat and throw a Ku band threat in there as well if you would like but the V1 will still prevail in prioritizing the threats and keeping you aware of what is going on.
K and Ka would be displayed on the V1 with it alearting in audio to the Ka threat as well as tracking the Ka threat direction with its arrows (as best it can and in most situations fairly accurately) while also tracking the K band bogey through the bogey alert and flashing a K threat as well. If the K threat becomes closer (threat priority again) it will switch back to K audio and the arrows and strength meter to reflect the closer K band signal while still flashing the Ka threat if it still exists.
I'm not sure your situational awarness arguement of Belscorts vs. V1 is a valid one.
My Belscorts I have and had also had the nasty habit of alerting to a threat that had already passed and the signal I'm 100% sure was no longer able to be detected by the Belscort for several seconds continuing to confuse a situation with multiple threats.
Either way, I'm not going to put my foot back in it until the K and Ka threats are gone or I am 100% sure that they are no longer an issue, so Belscort or V1 I'd basically react the same way either way.