Can someone point me to what I need to combine the 2...I looked on LI website but do not see it....Can someone pm some links to me.
Printable View
Can someone point me to what I need to combine the 2...I looked on LI website but do not see it....Can someone pm some links to me.
If you email LI, they will tell you. As I was asking the same question not too long ago.
Due to my affiliation with Blinder USA no one from LI can talk to me....They will sell to me but will not have a conversation with me. I completely understand this but would like to purchase.Quote:
Originally Posted by Char1iebrown
Oh, I understand. Legal stuff ha. Im wondering the same thing, Ill drop LI and email and I will let you know what I find out, unless a forum member knows whats up.
http://laser-interceptorna.com/Hoste...diagram_01.jpg
Here is a diagram from the LI site showing how it hooks up. looks like you need a concealed display and a wiring harness from the LI serial connector to the V1.
At first it was confusing for me too. I ended up not doing it, because I didn't feel like hearing a voice everytime I got a K false.Quote:
Originally Posted by mhardy2288
You basically no longer use the hardwire kit, if you use the schematic linked. Pin 1 on the DB9 Serial cable will now power your V1 (everytime you shut off your LI, you shut off your V1). You can opt to skip out on Pin 1 on the DB9 to leave the hardwire power source intact.
You'll need a 6 Pin telephone splitter. Basically, using the schematic provided. You go from the DB9 port on the LI to a 6 Pin Telephone splitter. From there, you go to your concealed display and V1.
I'm not sure why in the schematic the Cigarette lighter adapter is shown.. But you will need to get yourself a 3 Port (or 2 port and a gender adapter) telephone splitter.
X AND K are actually turned off, so you will only get warnings for Ka and Laser.Quote:
Originally Posted by ATFAt first it was confusing for me too. I ended up not doing it, because I didn't feel like hearing a voice everytime I got a K false.Quote:
Originally Posted by mhardy2288
Or you need something like this:
http://speed.g-zona.hr/pics/LI_V1_interface_smaller.jpg
On one side it's DB9 that you plug into the LI and on the other side it's 2 RJ11 ports, as on V1's Direct-Wire Power Adapter, MAIN and ACCESSORY. No additional splitters or rotating cables. It's plug and play. :)
After that you can use Concealed Display and Remote Audio Adapter :D
Is it true that the mute does not work on the V1 when connected to LI.
nice work on the cable...very clean :)Quote:
Originally Posted by g-zona
pa/jam mode switch harness comes with a extra wire that is for the V1. i didn't hook mine up because i rather have the V1 on it's own power source so i know after the i kill the LI's if I'm still being targeted by laser the V1 will alert
For what purpose? The reason I ask is that this can also be done with Cheetah.Quote:
Originally Posted by mhardy2288