Printable View
Here are some pictures of my laser interceptor install. Its an LI Quad.
Anyone willing to help me test in the southeast MI area?
Here is the front of the car
http://www.the370z.com/members/antiv...ad-install.jpg
and here is the rear
http://www.the370z.com/members/antiv...-placement.jpg
Killswitch mounted in center console
http://www.the370z.com/members/antiv...er-console.jpg
looks clean, love the car.
the issues i see, the front is a bit low.. but obviously you didn't have many options there. so be careful for ambush PT's.
are the heads on the back pointing straight forward? or are they pointing upward with the angle of the car?
sweet install :thumb2:.nice ride
nice and clean. any RD yet?Quote:
Originally Posted by aa2033
but yea heads look toed out like you aligned with the lower black trim .. but that can just be angle of picture?
Could be the picture but it looks like the Laser Interceptor heads on the front are NOT pointed 100% straight which will lead to high puncthroughs
I suggest the OP move his front heads so they are pointed straight down the road and not toed out to the side like they appear in the picture
I agree, it looks as if the OP mounted the heads to align with the body and not point them straight down the road.Quote:
Originally Posted by crazyVOLVOrob
If they are indeed mounted in this configuration he's going to get some CM PT's in the prime target zone of 500' or so!!!
Didn't StealthStalker get 1100ft punchthroughs when his LI heads were pointed off the side of the alittle?Quote:
Originally Posted by category4I agree, it looks as if the OP mounted the heads to align with the body and not point them straight down the road.Quote:
Originally Posted by crazyVOLVOrob
If they are indeed mounted in this configuration he's going to get some CM PT's in the prime target zone of 500' or so!!!
On the MOAC, but everyone gets 1000' PT's on the MOAC!!!!Quote:
Originally Posted by crazyVOLVOrobDidn't StealthStalker get 1100ft punchthroughs when his LI heads were pointed off the side of the alittle?Quote:
Originally Posted by category4I agree, it looks as if the OP mounted the heads to align with the body and not point them straight down the road.Quote:
Originally Posted by crazyVOLVOrob
If they are indeed mounted in this configuration he's going to get some CM PT's in the prime target zone of 500' or so!!!
Nah I believe this was in TX eventQuote:
Originally Posted by category4On the MOAC, but everyone gets 1000' PT's on the MOAC!!!!Quote:
Originally Posted by crazyVOLVOrobDidn't StealthStalker get 1100ft punchthroughs when his LI heads were pointed off the side of the alittle?Quote:
Originally Posted by category4I agree, it looks as if the OP mounted the heads to align with the body and not point them straight down the road.Quote:
Originally Posted by crazyVOLVOrob
If they are indeed mounted in this configuration he's going to get some CM PT's in the prime target zone of 500' or so!!!
Anyways the Original Poser, antivirus6613, needs to fix his front heads so they are pointed straight forward, down the road, not have the heads run with the body lines of the car
Hmm, the pictures can be a bit misleading, the heads are straight to the road, the curvature of the car really made installing the brackets difficult so I used the 3M tape and tried to align them as much as possible with the road ( pointing straight) instead of the frame.
Anyone around the SE MI area with LIDAR gun?
I have a V1 paired with this and the other day I got shot with LIDAR from <800ft and he kept the gun on me for 5 seconds then moved it away, I wasn't over PSL so I killed the jammer but not until after he stopped shooting...im thinking he must have gotten a PT then. BTW I was in the middle lane doing 75 in a 70. Car attracts tons of cops...
Do not screw with LEO's. Kill the jammer and don;t try JTG, it's going to eventually cause you more trouble than it's worth.Quote:
Originally Posted by antivirus6613
Save the JTG for testing.
Yeah I should've killed it quicker, but by the time I was going to hit the switch he stopped shooting me.
I know I wasnt the fastest car on the road so maybe he took his gun off, or did he get a PT?
Quote:
Originally Posted by antivirus6613
No way to ever know. Get it tested to be sure.
Nice install, I couldn't really tell on the first picture as it was a little dark...rear looks good but Im new to the LI installs so it might need a tweaking...:thumb2:
Nice Z.
Off topic, but...Are you going to ZdayZ this year?
Did you do it yourself or use an installer? How did they route / place the rear heads? Looks awesome!Quote:
Originally Posted by antivirus6613