Finally got my LI Quad installed, now I just need to get it tested. No pics just yet.
Printable View
Finally got my LI Quad installed, now I just need to get it tested. No pics just yet.
Awesome, let us know how it test?
They seem toed out...
http://protias.com/Pictures/Hyundai%...0/IMG_0311.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0312.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0313.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0314.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0316.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0317.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0318.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0319.JPG
Bigger pictures to click on:
http://protias.com/Pictures/Hyundai%...0/IMG_0311.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0312.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0313.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0314.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0316.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0317.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0318.JPG
http://protias.com/Pictures/Hyundai%...0/IMG_0319.JPG
No comments? I'm surprised.
Front looks toed out. Rear looks tilted upwards.
Rear install looks good. The front though is a little low.
Do some testing. Rears look slightly tilted IMO. Fronts should be sufficient.
Did you do the install yourself and if so how was it?
nice! but if the front sensors are only 6" below th headlinghts then the car is 42" wide? and this will be a pice of cake for li!! 1.1 meter??
computerpro3 came over from Cinci to help me. It wasn't all that hard. Pro tip: If you plan on lots of counter measurements, make sure you have a large punch through on the firewall.
The width of my car is 67.7 inches, which will be pretty easy for the LI provided this is all straight. I am a bit concerned my front is a bit toed out.