1 Attachment(s)
East Coast Countermeasure Installer
Feel free to contact me if you need your setup tested or installed. I install Alpriority, BLINDER, LASER INTERCEPTOR, ESCORT,Escort Live, Zr4's & can do Custom Setups. I have Lidar gun's and radar guns for all radar US bands & freq's. I've been in this hobby since 1997 and have gathered quite a bit of experience since then. I will get you protected. I do rear Jammer head installs depending on the vehical and if can be done.
I will fly or drive to your area for the install.
Located On The East Coast in Cherry Hill,NJ area
Attachment 6715
Re: eastcoast countermeasure installer
vouch radarrob's awesomeness
Re: eastcoast countermeasure installer
Quote:
Originally Posted by
Riptide
vouch radarrob's awesomeness
X2
Re: eastcoast countermeasure installer
Re: eastcoast countermeasure installer
Cool. I'll pass the word around in MD. I can vouch that he most definitely can test the install. ;)
Cheers.
Re: eastcoast countermeasure installer
I just had Radar Rob install my rear LI's... he not only found an awesome spot to put them but he also installed them in 18degrees F with 4 degree windchill factor outside.. After we were all done we tested everything.. and of course LI's held up. i will be posting Pictures of the install as well as the testing! Thank you so much Radar Rob! A+++ Customer service!
After i wash my car ill take some pictures!! (i have salt and dirt all over my car.. thanks to NY's first snow storm this year lol.)
Re: eastcoast countermeasure installer
Im excited to have Radarrob install my laser interceptor in my BMW. I will also take many pics and put them up here for others to see.
Re: eastcoast countermeasure installer
THANK YOU SO MUCH RADAR ROB! GREAT JOB!! i had so much fun! It was well worth buying the LI's! on my way to NJ i got shot by a LEO and on my way home i got shot going 85 in a 65!! savvvvvvvvvveeeeeeee!! Enjoy my Video showing radar rob installing my setup and then testing it!
Re: eastcoast countermeasure installer
"I found a weakness ... It could be because your car is dirty." LOL!
Rob, are you sure you didn't get the speed of the joggers instead?
Joliver, nice install but why waste money on countermeasures? I mean, it's not like a 'Stang can go faster than the speed limit anyway. (just kidding :) ). Cool video, thanks.
Cheers.
Re: eastcoast countermeasure installer
Quote:
Originally Posted by
ersin
"I found a weakness ... It could be because your car is dirty." LOL!
Rob, are you sure you didn't get the speed of the joggers instead?
no readings on joggers.
Joliver, nice install but why waste money on countermeasures? I mean, it's not like a 'Stang can go faster than the speed limit anyway. (just kidding :) ). Cool video, thanks.
Cheers.
no readings on joggers.
Re: eastcoast countermeasure installer
Quote:
Originally Posted by
radarrob
Quote:
Originally Posted by
ersin
"I found a weakness ... It could be because your car is dirty." LOL!
Rob, are you sure you didn't get the speed of the joggers instead?
no readings on joggers.
Joliver, nice install but why waste money on countermeasures? I mean, it's not like a 'Stang can go faster than the speed limit anyway. (just kidding :) ). Cool video, thanks.
Cheers.
no readings on joggers.
Oh man, those jogging suits are really stealth. Maybe we can get some of that material on our cars to test it out?
Re: eastcoast countermeasure installer
Re: eastcoast countermeasure installer
I would like to thank Rob (RadarRob) for installing the Laser Interceptor dual into my 2008 BMW 335XI coupe today. He did a great job. It was not an easy install and he came through and made it perfect. He had to customize the grill to install the Laser Interceptor and it is still very stealth. After testing the unit and making one small adjustment we had JTG every time. He used the True Speed and Ultralight I believe. I recommend anyone looking to get a Laser Jammer to have Rob install it for them. He knows what he is doing and is very nice. He also tests the system out unlike shops with laser guns that are used in the area. Thanks again Rob.
Re: East Coast Countermeasure Installer
the heads are toed out rob
Re: East Coast Countermeasure Installer
the way the grill is makes them look toed out. If I push them out any further there is no room for placement. A bmw install is very hard.
Re: East Coast Countermeasure Installer
Quote:
Originally Posted by
radarrob
the way the grill is makes them look toed out. If I push them out any further there is no room for placement. A bmw install is very hard.
Tell me about it! Rob, this may be a new career for you! Too bad the demand is not that high although you could create a mobile install center and bill customers for travel expenses. I would guess that you would have a virtual monopoly on installing and testing.
Re: East Coast Countermeasure Installer
upstate I'm looking into more options rite now on possibly going out west or fly to do install's.if I was to do that the price would not be cheap to install + my exspenses to get to the person.
1 Attachment(s)
Re: East Coast Countermeasure Installer
Did you cut all the way through the grill? Looks like you did in the this pic, but what about the other grill?Attachment 4978
Re: East Coast Countermeasure Installer
I cut both grill's. I was tempted to use brackets under headlights. Customer did not want me to drill.
Re: East Coast Countermeasure Installer
Looks very nice radarrob, maybe you can help me out?
http://www.radardetector.net/forums/...935#post805935
Re: East Coast Countermeasure Installer
Re: East Coast Countermeasure Installer
Re: East Coast Countermeasure Installer
Not sure what to say other then impressive.
Re: East Coast Countermeasure Installer
I'm glad you guys found the firewall. Good job Rob!
Re: East Coast Countermeasure Installer
I found access to the firewall by going to the Honda Ody Club message board. Another poster put pics of a different install he was doing and pointed out the grommet he used with pics. That helped a lot. It practically saved the day.
So for those who are scratching their heads on where to find firewall access, check out the message boards of your particular make and model and type in "firewall" in the search box. Worked for me!
Re: East Coast Countermeasure Installer
The vehicle forums are the best source for finding ways through the firewall. That's how I found access for the Vette as well.
Re: East Coast Countermeasure Installer
Went through the carwash yesterday and the heads held up. Will paint the screws black next.
Re: East Coast Countermeasure Installer
Quote:
Originally Posted by
Irukanji
Went through the carwash yesterday and the heads held up. Will paint the screws black next.
Nice.
Re: East Coast Countermeasure Installer
Quote:
Originally Posted by
radarrob
Nice bare feet LOL:D
Re: East Coast Countermeasure Installer
Great results! with this setup
thank you riptide and rasheed for helping me
Re: East Coast Countermeasure Installer
Once again, good work RadarRob!
Re: East Coast Countermeasure Installer
Re: East Coast Countermeasure Installer
hi rob, would you do an install comparable to this write up?
http://www.m3forum.net/m3forum/showthread.php?t=355359
Im in CT
Re: East Coast Countermeasure Installer
Re: East Coast Countermeasure Installer
Im new to this site, but saw the great write up over at M3 Forum and Im considering getting the LI with V1 shortly. Thank you aa for taking the time and effort to make what seems like a great product even better
Re: East Coast Countermeasure Installer
WOW, xyd really edumacated them on jammers! They all had woodies by the end of the thread! Course, they're all BMW drivers. :p
Re: East Coast Countermeasure Installer
Quote:
Originally Posted by
edm3
PM sent
Re: East Coast Countermeasure Installer
Quote:
Originally Posted by
edm3
That thread is badass. The creator of it is clearly superior to anything rob can do. I'm sorry, its just the truth.
