Which models have the frequency counter display, and how accurate is it? Is it continuous in the Ka band, or does it just do the hot frequencies? Thanks.
Printable View
Which models have the frequency counter display, and how accurate is it? Is it continuous in the Ka band, or does it just do the hot frequencies? Thanks.
Not accurate!Quote:
Originally Posted by o2bad455
It can hop around alot!
It can be dead steady locked on a frequency!
Basicly the only cool thing is that it will allow you to know which Ka gun is being used i.e. BEE III (33.8 ), STALKER (34.7), TALON (35.5).
The actual display will puke out something like 33.680, 33.800, 33.780, 33.880 etc which would indicate a BEE III. 34.680, 34.700, 34.770 etc for STALKER. 35.500, 34.900, 35.550 etc for TALON.
It is more of entertainment value. But usefull. As far as X and K band well there is only one frequency, such as K 24.150, and you will see lots a variation from radar sources, police or door openers up and down the scale.
There is huge threads with everyone chipping in there frequencies which all revolve around the big 3 Ka bands. You can see ALL the variation in numbers.
Thanks amoney. So, is it just the X50 and the RX-65 that have it? How about the STi? Any others?
I believe others have it as well, do not know the extact list of models, check the manufactures online.Quote:
Originally Posted by o2bad455
Quick check V995 and STi have it.
http://www.beltronics.com/radardetectors.html
But does the STi have Ka narrow (Accusweep/USA) mode?
The Beltronics site tells that the Vector 995 and the STi Driver both have tech mode (frequency display) :) I couldn't find any info on the RX65. The Escort site does not seem to say which have tech mode.
Correction: It does show that the 8500 X50 has the frequency display, but doesn't show if any others do.
Ahhh, I just found the Beltronics Pro site. RX65 is there :)
I do not think so.Quote:
Originally Posted by o2bad455
As for the rx65 it is on Beltronics Pro page, don't know why the separation.
http://www.beltronicspro.com
Thanks :)
The answer seems to be that only the following have "Tech Mode":
Bel Pro RX65
Bel Pro RX75 Remote
Escort 8500 X50
Bel Vector 995
Bel STi Driver
From the STi description on the Bel site: "Ka-band: 34.700 GHz ± 1300 MHz".Quote:
Originally Posted by amoney
That's 33.4 to 36.0, so I'd say it's got full Ka coverage.
Yes, actually they all say that, they are all capable of "wide" converage, but was not sure about STi having a "usa" mode ka narrow. Sorry if the my question was misleading but thanks for the clarification!Quote:
Originally Posted by o2bad455
Understood. The description doesn't mention any special Ka coverage modes.
It can be anywhere from right on freq to off by 30 MHz, at least on K-Band. I tested the RX-65 against a K-Band test source and a freq counter here:Quote:
Originally Posted by o2bad455
http://www.kc8unj.com/radar/freq/
Also, for each "calibration cycle" of the detector, I believe it only displays frequencies in 16 or 18 MHz increments on K-Band, and 18 or 21 Mhz on Ka.
Sweet. Is the "H" in the low freq and high freq tests indicating out of range or is that just the default display?Quote:
Originally Posted by jimbonzzz
I didn't look at the link Jim gave (dial up and saw it had tons of pics).. But I would assume you are talking about the 'Pilot' (The 'H') which stands for Highway mode.Quote:
Originally Posted by o2bad455
Yup, that sounds like it. Thanks.
it may not be 100% perfect but it's good enough to let me know what type of gun the officer is using
i went to the GOL website to find all the Ka radar manufacturers and the frequency of their radar guns. I found the following
MPH Industries 33.8 GHz
Stalker Radar 34.7 GHz
Kustom Signals 35.5 GHz
Decatur Radar 35.5 GHz
IS THAT IT? Are there only 4 manufacturers that make Ka radar guns in the USA?
If i drive around in tech mode and i see a frequency that lists 34.xxx. Can i assume it's made by Stalker?
There's also McCoy's Law Line @ 35.5 GHz, I just haven't put that on the website yet.
If you encounter police radar around 34.7 GHz, it is likely a Stalker. But sometimes cheap detectors (Cobras etc) can cause falses around this freq too...
Jim
Cobras :xQuote:
Originally Posted by jimbonzzz
Jim, Isn't POP only used by one manufacturer? So, if I have POP off on my STi and i'm driving and get a frequency that points to the MPH BEE 3 type radar, is it possible to then assume that POP may be in use in my area? I'm trying to determine if i can tell based on the frequency whether the radar gun is capable of POP or made by the same manufacturer that makes POP guns.Quote:
Originally Posted by jimbonzzz
MPH Industries is the only mfr with POP.
If you see police using radar @ 33.8 GHz, then it is basically one of three units: Python, Enforcer, and BEE III. Enforcer and BEE III have POP capability.
Jim
Your the man :D . Also are the frequencies for Python, Enforcer and BEE III different? or are all MPH radar guns @ 33.8 Ghz? I also read somewhere that Stalker makes a radar gun that can frequency hop. Is that possible?Quote:
Originally Posted by jimbonzzz
i really want to master the frequency thing and run only in tech mode. Any good place to get more info?
Yes, the freqs for the Ka versions of the Python, BEE III, and Enforcer are all @ 33.8 GHz. But they'll all be slightly different because of drift. Anywhere between 33.7-33.9 is considered "in spec". But on the tech display, you have the margin of error of that to take into account as well, so it might display outside of these ranges even. It is conceivable that MPH products could display anywhere between 33.65-33.95 GHz on the techdisplay.
Stalker talked about developing a "frequency hopping" or "spread spectrum" gun in the early 90's, but it never happened. It IS possible to do, but I think they would have some difficulty bringing such a technology to market, because all of the jurisdictions alredy have judicial notice on the "regular" fixed-freq radar.
Be VERY careful with the "freq thing".
Some people think that they can reliably identify X and K band falses just by the frequency alone. But, if that were possible, they would make the detector so it doesn't alert to those freqs in the first place! Bottom line is, anything the detector alerts to is potentially police radar.
It is more useful on Ka band IMHO. You can get a good idea by the freq who makes the unit. And on the rare occasions that you might get Ka falses, you can sometimes tell because the frequency isn't around any of the main freqs for US radar. But again be very careful, as sometimes at first the techdisplay will lock on to a arbitrary frequency until it has a good fix.
Jim
Thanks Jim, I only plan to use Tech mode on highway when i know that anything i pickup is probably a police radar. i just want to get a better idea of the types of Ka radar guns used in my area and if i can tell if MPH specifically is used so i can determine if POP is used. (consider it doing my homework)
Excluding falses, I'm making the assumption that anything @ 33.xxx GHx is MPH anything @ 34.xxx Ghx is Stalker & all others are @ 35.xxx Ghz.
Is that too broad or too far from the truth?
Is K band more difficult to determine the mfr?
Yeah, that's a bit too broad. Maybe go at most +/- 150 MHz from the center freq, so:Quote:
Originally Posted by csteph
33.65-33.95 MPH
34.55-34.85 Stalker
35.35-35.65 Kustom/Decatur/McCoys
There is no way to determine the manufacturer of K-Band units, ther are all 24.150 GHz +/- 100 MHz. So you'll see some different freqs, but that is only due to drift, not different freqs used by different MFRs.
Jim
In Indiana, there are far more Python I/II radars in service than there are BEEIIIs. They are all on 33.8 GHz though.
The Indiana State Police use Pythons for their Ka band radars.
The local cops that use Ka are seen more with Stalkers.
Are all the Stalkers on 34.7? Is it possible they have some at 33.8 or 35.5? That is interesting that they abandoned the frequency hopping scheme.
GTO_04
all stalkers are 37.7 freqs for KA band.
What ? :shock: Is that a typo :?:Quote:
Originally Posted by carlito
Yeah, that's a typo.
ALL Ka Stalkers are @ 34.7 GHz.
Sometimes when I encounter a Ka false (Cobra?) with my X50 it'll display an odd frequency, like 33.200 (which is outside the Ka band entirely), or odd freqs in the 34.xxx or 35.xxx range.
Also, sometimes the display will show the wrong frequency when it first picks up an alert, then it corrects itself after a second or two.