Where should 2 LI heads go?
http://screensnapr.com/e/58aG4I.png
Printable View
Where should 2 LI heads go?
http://screensnapr.com/e/58aG4I.png
Mount here:
Cliff
Nice looking ride.
I have mine just above the center license plate area and one vent area in from the head lamps. The LI heads fit absolutely perfect inside the the grille section without any modification at all.
I may however see about moving them up higher where Cliff shows.
BTW, I have the exact same car with same grille!
Yeh directly above the license plate and one slot in from the headlights. Ive found cops aim low in Australia or centre mass. Not sure where your from and how they are instructed to to shoot Laser.
IMO for best performance mount in front of headlights using Li brackets.
Thought this might help. It is an S4, but the front ends are close enough. I tested it out this weekend and got JTG against an Ultralyte LRB. The heads are level and square to the front of the car. Easy to do on these cars and requires no drilling, just 3M mounting tape cut to fit and a straightedge. The wire run for the switch is also easy, and I believe your interior layout is relatively similar.
http://farm6.static.flickr.com/5163/...158c5232_z.jpg
http://farm6.static.flickr.com/5097/...71cee148_z.jpg
http://farm6.static.flickr.com/5013/...dd264802_z.jpg
Looks exactly like my install on the front grille. In the year of owning the LI I've only been hit once with Laser and I wasn't speeding.
I do like the off switch location! I installed mine on the knee bolster to the right of the steering wheel. I put in the parking switch also with mine.