*Updated! Working V1 Stealth Remote Display With video clips

edit

edit

Quote:

---

Originally Posted by infin

Have a question for you guys, i have to possibly change my coding around for the J feature, when is a J displayed? any other LED's on when its on? is it right after it detects a boogy? TIA i should have this thing working soon.

---

The J feature appears or alerts happens when it detects a radar leak from other detectors. There is a flaw with this feature and infact, i like to take it out or disable it without affecting radra signals.

Does the mute button still work to mute the volume or is it just simply used as a switch to turn on the display for a few seconds? I believe other owners will like your idea.

Quote:

---

Originally Posted by Azonehits

The J feature appears or alerts happens when it detects a radar leak from other detectors. There is a flaw with this feature and infact, i like to take it out or disable it without affecting radra signals.

Does the mute button still work to mute the volume or is it just simply used as a switch to turn on the display for a few seconds? I believe other owners will like your idea.

---

If i program the chip to have a shorter delay the J will never display ever(will only display when a signal is sensed), but you will never know if it was a good or bad signal (some people like the J). I can do custom timings for whatever application people may want also.

The Mute button is still a mute button, still changes the modes if you hold it down also.

Got all the bugs worked out, here are the pictures of the chip, chip installed and in the case, also another video of it in action.

Revised the code so if you press the Mute button on the remote display, the main unit, or a remote mute button it will display the current mode (before only the remote display mute button would activate this feature)

Here are the prices:

$45 installed including priority shipping back to you. (US)
$20 for a pre wired chip with instructions. including priority mail to you.(US)

code can be changed to suit your needs also.



http://www.imagestation.com/picture/...a/eaa51728.jpg

http://www.imagestation.com/picture/...b/eaa5173d.jpg

http://www.imagestation.com/picture/...6/eaa51704.jpg

other video:
http://www.youtube.com/watch?v=8WsHMumXX84

Last video after the pics wont load for me.

Me either :cry:

In any event. Pretty Awesome. Great work!

I can't watch the video but I have to give you props, that is some awesome work!

Very cool.

I guess I am the only one who does not like this concept. My remote is located low enough on my dash as not to be seen from the outside but yet easy for me to see. Seeing the lights on the V1 gives me the confidence it is working and on. I don't want to have to keep pressing the mute button to give me that assurance and I sure in hell don't want to find out a ground wire or fuse blew "after" I get a ticket for 20 over and did not get a warning.

At least leave one small light on.