LP905 and Blinder M40

**madmurf** · 08-07-2007, 10:25 PM

I currently have a M40 wired up to my car using all 4 heads at the front.
I also now have a spare LP905 unit (ZR3). My question is can I run both the LP905 (3 heads) and the Blinder M40 (4 heads)on the same car to increase protection or will they stuff each other up like running two detectors.??
I dont want opinions I have my own I just want to know if any one has done this or its been tested.

**ELVATO** · 08-07-2007, 10:49 PM

People have run multiple jammers without problems.

Just curious, are you going to run both up front? Or are you runnung the LP905 in the back?

**madmurf** · 08-07-2007, 10:59 PM

Originally Posted by ELVATO

People have run multiple jammers without problems.

Just curious, are you going to run both up front? Or are you runnung the LP905 in the back?

All up front Western Australian Police dont laser from behind.
They are bit behind in how they use them. Usually tripod setup on 2k stretch, though the other day they where using one out the side window of a car at night on a side street. (maybea ex USA cop)

**crazyVOLVOrob** · 08-08-2007, 12:13 AM

thats a bit of over kill on a car. But yes you can run both on one car. But with an M40 you are probably well covered do put the lp905 on another car

**TSi+WRX** · 08-08-2007, 08:12 AM

Agreed w/ the other brothers here - it shouldn't be a problem to run all at the same time.

Overkill? Maybe, particularly depending on the type of hardware that you're likely to face - check the GOL test to see if you're truly covering any potential "holes" in one or the other countermeasure.

As to "interference," that shouldn't happen. Like ELVATO said, others run multiple systems with no ill effect (and actually, note benefits), but whether or not such use will be more likely to induce Jam-Codes remains an unknown.