dslrip 35.5 Q/T video/V1

[dslrip32]

Please note that this same location, same LEO, same vehicle, although over a month ago, Redline and 9500ix was silent to this. I know it is the same LEO because I know what he looks like, as he patrols the school in the mornings where my 5 year old goes to. I know it is 35.5 because I verified it with my old Redline and 9500ix via spec mode. I have video of both but why post when they were quiet and I did not have V1 on with it at the time, for reference, and it would have been thrown out anyway for the theory of interference. Sorry for the lengthy video, but you get an idea that it, (Q/T), is in my area used by local LEO's. If you notice, this LEO is Q/T'ing every single car coming up this corner stretch of highway, like Q/T is how it is supposed to be used, lol. From where I was sitting at, towards the end of the video on the highway, it was approximately .4 miles.

[v1user]

Pow!!!! I like the accent.

(no offensive comment here)

[dslrip32]

Pow!!!! I like the accent.

(no offensive comment here)

LOL, I don't... Unless hunting deer... Also, don't worry about use of words with me. I do not get offended by words or phrases as some do.

[stlcardsfan]

It's amazing how much difference there is between a Texas Southern Accent, a Tennessee Southern Accent and others such as Atlanta.

I don't think it can be said for sure if that was QT. When he targeted you the alert was held for pretty long.

Thanks for sharing!

[oscar_169]

I like this Video

[mswlogo]

How on earth is that Q/T when the V1 alerted for approx 2.5 secs on the first I/O and a full 5+ seconds on the second I/O.

Escort would have picked that up fine.

I'm not denying Q/T exists or if V1 does better. But that doesn't look like Q/T by my understanding which should be under 1 second.

A Q/T would be a blip on the V1.

EDIT: I had not even watched the whole video but I went back and did. Later in the video it looked like "Q/T" I think you were picking up a refection from a WEAK C/O and soon as you finally drove up there sure enough you got a FULL STREAM hit. No Q/T. Not even close.

I'm not even sure this was even I/O let alone Q/T.

Good honest video though, kudos for the work but you need to cross check your theories more. It is crystal clear to me this is C/O or a VERY heavy trigger I/O. The blips you say were Q/T are weak reflections off the cars going over the top of the hill.

[dslrip32]

It's amazing how much difference there is between a Texas Southern Accent, a Tennessee Southern Accent and others such as Atlanta.

I don't think it can be said for sure if that was QT. When he targeted you the alert was held for pretty long.

Thanks for sharing!

It may or may not be, but the 9500ix and Redline were quiet to this same LEO, and also from the short alerts from other vehicles it appears that way, to be Q/T, but who knows 100%? Only Mr. LEO. As far as the V1 holding the alerts that long, it may be the way my V1 is set. I changed something on the ka part that had to do with alerts.

[dslrip32]

How on earth is that Q/T when the V1 alerted for approx 2.5 secs on the first I/O and a full 5+ seconds on the second I/O.

Escort would have picked that up fine.

I'm not denying Q/T exists or if V1 does better. But that doesn't look like Q/T by my understanding which should be under 1 second.

A Q/T would be a blip on the V1.

Q/T would not have been a "blip" at that close range as far as the alerts., from what I have seen by other videos, such as LEOENFORCEMENT's, those are approxiamtly 3 seconds in duration, and this LEO was shooting 35.5, not DSR 2X. Also the alerts from a distance were short in duration, at .4 miles away. And again this is 35.5.

Also I changed menu "5" to more responsive as far as the KA alerts, so that may be why mine holds the signal that long. I can change this and do a rerun when this LEO is at that location again this week..

mswlogo, please read above what I posted and comment on this. That may be why the alert stayed that long in duration, I dunno.....

[snoopyc4]

Nice video. I'm glad you figured out how YouTube works. You can't tell if it is QT or I/O though with just the V1 alone. You would have to run a Belscort remote RD along with the V1; if the Belscort misses, then you know it is QT. Keep the vids coming Any Redline video?

[Cips]

Did you warn the drivers passing you to slow down?

Good video.