PDA

View Full Version : Vertical mount OK? RX65



radarduck
04-26-2005, 05:10 PM
I'm trying to figure out where to mount an RX65 in my fiberglass fairing. Since we're talking radio waves, a vertical mount works as well as horizontal and what's important is that it points forward, right?

(Yes, I know I'll give up the laser by hiding it in the fairing - not a big deal for my touring needs since I avoid metropolitan areas and interstates.)

crazyVOLVOrob
04-26-2005, 05:34 PM
it would reduce the range of the RX65 signifigantly try one of these mounts
http://www.radarbusters.com/products/accessories/motorcyles/mounts/default.asp
The radar detector performs best when mounted parallel to the ground

Radar Roy
04-26-2005, 11:49 PM
This would effect the polarization and perhaps reduce the range of your detector

radarduck
04-27-2005, 12:05 AM
So, are radar guns polarized? If so, why? Reduced interference?

And, if they are polarized, are they polarized vertically or horizontally or at an angle?

I looked at a few of the install manuals on-line for some of the remote units and some of them say that hte best moutning for remote antennae is at a 45 degree angle.

Example:
http://www.whistlergroup.com/manuals/Remotes/3300swra.pdf

If this is true, then I can only assume that the antennae on high-end units like the RX65 have internally mounted their antennae at 45 degrees to get the best overall reception. Therefore, a ninety degree rotoation of the antenna shouldn't have material impact unless all radar guns are polarized at the same rotiation and in the same angular direction - this doesn't seem very likely to me.

jimbonzzz
04-27-2005, 12:44 AM
So, are radar guns polarized? If so, why?

And, if they are polarized, are they polarized vertically or horizontally or at an angle?

I looked at a few of the install manuals on-line for some of the remote units and some of them say that hte best moutning for remote antennae is at a 45 degree angle.

Example:
http://www.whistlergroup.com/manuals/Remotes/3300swra.pdf

If this is true, then I can only assume that the antennae on high-end units like the RX65 have internally mounted their antennae at 45 degrees to get the best overall reception. Therefore, a ninety degree rotoation of the antenna shouldn't have material impact unless all radar guns are polarized at the same rotiation and in the same angular direction - this doesn't seem very likely to me.

Yes, they are polarized, this is by their very nature. The vast majority of "regular" police radar guns are circular polarized and have horizontal and vertical components, and the receivers in detectors are vertically polarized. The difference is photo radar. Some photo radar units are horizontally polarized. If the detector is verically polarized, the sensitivity to a horizontally polarized signal can be up to 20-30 dbm less than a verically polarized signal. Usually the "rule of thumb" is it cuts range by 1/3 or 1/2, but in worst cases it could be more. (now you can see why they do it for photo radar!) When radar bounces off of objects, it can change the polarization some, so we do have that in our favor. It has been suggested that for better reception to certain models of photo radar, one can turn their "regular" detector on it's side. It does appear that with the Whistler you referenced, they're trying to get the "best of both worlds". As far as what they do with other units, it is difficult to say. Generally if you dont live in an area with photo radar, I wouldn't worry about polarization too much...

Jim

radarduck
04-27-2005, 12:58 AM
Interesting topic .... in thinking about it , it does make sense that radar gun manufacturers would use vertical polarization to get the highest quality return signal - and that detector manufacturers would polarize antennae to get the best detection.

Currently, my state (Washington) isn't using photo radar except for a few small municipalities but given what lengths they're going to these days to generate revenue, I wouldn't be surpirsed to see one on every corner within a year. %%&#^&%^$%#^!!!!!!!

Looks like I'll have to work on a horizontal install of the unit.

Thanks for the info.

JTW
04-27-2005, 02:05 AM
I'm pleased that we have someone like you Jim that can answer tech questions like these. You're the man.

Veil Guy
04-27-2005, 09:10 AM
No this is an interest idea.

How about the construction of a detector that has both configurations for both vertical and horizontal.

Jimbo, it would be interesting to see if by rotating the radar gun 90 degrees if detector sensitivity is reduced...

What do ya think?

The Veil Guy 8)

jimbonzzz
04-27-2005, 09:27 AM
Sounds like a good idea to me.
I would definitely like to see some real-world test results on this. It would also be of great benefit to the people where photo radar is a big threat...

Jim

compu44
04-29-2005, 03:53 PM
If I have some spare time tonight, i'll take a few runs at an X and a K source (won't be real i'm afriad, just door openers) and see if I can come up with anything.

lowflyer
04-29-2005, 05:52 PM
If I have some spare time tonight, i'll take a few runs at an X and a K source (won't be real i'm afriad, just door openers) and see if I can come up with anything.

Better watch out for those door openers compu44. I hear they get mighty angry when they are bothered. :wink: Go out and find a cop running radar and chase him around like outrun does will you already! I dare you I double dog dare you. :wink: :lol:

compu44
04-29-2005, 09:40 PM
Most of the officers around here run radar while mobile, so it's not something that one could test against more than once. There's one town around here that I can think of that runs stationary all the time, and as luck would have it i'll be going through it tomorrow. I'll see what I can come up with.